Tilt cab to repair position, tilt back

AR60.80-B-0010E

Tilt cab to repair position, tilt back

01.10.2018

Model

934.241/251

with code FK2 (Cab tilting mechanism, electrohydraulic)

Model

938.142

with code FK2 (Cab tilting mechanism, electrohydraulic)

1

Actuation switch

3

Valve lever

2

Identification adhesive label

4

Tilting pump

Tilt

 Warning

Risk of injury caused by body parts being pinched or crushed as cab is tilted

Ensure that no one is within the tilting range of the cab as it is being tilted. Always tilt the cab all the way to the end position and secure with the safety strut.

AS60.80-Z-0001-01A

1

Turn the ignition on and press the tilting switch on dashboard

 The control light on the switch turns on.

2

Spin the valve lever (3) at the tilting pump (4) to the tilting position

3

Open the front compartment

4

Take out the actuation switch (1) from the holder

5

Press the switch (1) and tilt the cabin till the end

When the tilting pump (4) emits a louder noise:



The cabin is on its tilting position.

Return

6

Spin the valve lever (3) at the tilting pump (4) to the driving position

 Spin the valve lever (3) up to the end, otherwise the tilting pump (4) can emit a louder noise and the cabin will not return to the driving position.

7

Press the switch (1) and return the cabin till the end

 The cabin will lock automatically.

8

Put the actuation switch (1) back on the holder

9

Close the front compartment

10

Press the tilting switch on the dashboard again

If the control light remains lit:



Tilt the cabin forwards again and return it to the driving position.

11

Turn off ignition