ar6080b0010c

Tilt cab to repair position, tilt back

Type ar · topic 60.80 · version 0100 · 2016-02-12

Applies to: Body 693.8 with Vehicle 693

Where it sits

Function group 3 Body › 60 Body - general › 60.80 Cab, cab mounting — Series 693

EinPAS 35 Body/frame/detachable parts › 35.50 Cab suspension system/-cab tilt system/-air suspension › 35.50.40 Cab mounting/cab tilt system — Series 693

AR60.80-B-0010C

Tilt cab to repair position, tilt back

12.02.16

Body 693.8 with Vehicle 693

Tilt cab to repair position, tilt back

B60.80-0009-06

1 Key

2 Valve with Lock

3 Lever

4 Cabin tilting system pump

Danger!

Risk of injury by imprisonment and crushing while tilting the cabin

During the cabin tilting forward and backward, do no entry in the pitch area and take preventive measure to prevent the entrance of non-authorized persons. Always tilt the cabin to its final position and lock it with the safety device.

AS60.80-B-0001-01A

Tilt the cabin forward

1

Insert the key (1) in the valve lock (2) of tilting system pump (4)

2

Turn the key (1) in clockwise to unlock the valve (2)

3

Manually turn the valve (2) in clockwise up to the stop

Note the figure in tilting system pump (4) - (position “tilt the cabin”).

4

Fit the lever solid end (3) in the pump axle eye of the cabin tilting system (4)

The lever (3) is located in the tool box of the cabin (onboard tools).

Do not fit the end with rips of lever (3), because it will be damaged.

5

Actuate the cabin tilting system pump (4) until fully tilt the cabin forward

While acting the tilting system pump, the cabin is automatically unlocked.

Tilt the cabin backwards

6

Manually turn the valve (2) in counterclockwise up to the stop

Note the figure in the tilting system pump (4) - (position “return the cabin”).

7

Turn the key (1) in counterclockwise to block the valve (2)

8

Remove the key (1) of valve (2)

9

Fit the solid end of lever (3) in the pump axle eye of cabin tilting system (4).

Do not fit the end with rips of lever (3), because it will be damaged.

10

Actuate the cabin tilting system pump (4) until fully tilt the cabin backwards, back to driving.

In the end of the cabin return course, the cabin returns faster and the cabin locks are automatically actuated.

Danger!

The vehicle shall be operated only with the cabin locked in driving position.

Ensure the correct cabin locking in driving position, observing the corresponding pilot-lamp in the dashboard. If the pilot-lamp remains on with the motor running, turn off the motor and perform again the tilting procedure and cabin return.

Referenced documents