ar6000s0029ca

Remove/install detachable parts for replacing mounting bracket on front longitudinal member

Type ar · topic 60.00 · version 0100 · 2015-07-23

Applies to: Model 415 Left side of vehicle

Where it sits

Function group 3 Body › 60 Body - general › 60.00 General — Series 415

EinPAS 35 Body/frame/detachable parts › 35.21 Frame › 35.21.40 Carrier/mounting bracket/reinforcement — Series 415

EinPAS 35 Body/frame/detachable parts › 35.30 Front end › 35.30.35 Carrier/wheel well — Series 415

AR60.00-S-0029CA

Remove/install detachable parts for replacing mounting bracket on front longitudinal member

14.7.15

Model

415

Left side of vehicle

Remove/install detachable parts for replacing mounting bracket on front longitudinal member

S60.00-4819-06

Remove/install detachable parts for replacing mounting bracket on front longitudinal member

1

Air intake pipe

2

Screw

3

Electrical connector

4

Electrical connector

5

Screw

N33/2

Coolant preheating heater module

S60.00-4817-06

Remove/install

1

Remove ground line from battery

AR54.10-S-0003C

2

Remove front section of fender liner in fender

AR88.10-S-1310C

3

Remove upper front module crossmember

AR88.30-S-1940C

4

Remove front cross member

AR31.30-S-4115C

5

Remove radiator

AR20.20-S-3865CD

6

Remove condenser


Model 415 with engine 200, 607 with code H06 (Automatic air conditioning) Model 415 with engine 200, 607 with code HH9 (Semi-automatically controlled A/C, TEMPMATIC)

AR83.30-S-6540C

7

Remove glow output stage


Model 415 with engine 607

AR15.20-S-4500C

8

Remove air intake pipe (1)

Unscrew bolt (2) to do this.

9

Remove electrical connector (3) from injector heating module (N33/2)

Model 415 with engine 607

10

Remove electrical connector (4) from coolant preheating module (N33/2)

Model 415 with engine 607

11

Remove from coolant preheating module (N33/2)

Model 415 with engine 607

To do this, remove bolts (5).

12

Route electrical lines out of working area

13

Install in the reverse order

Referenced documents