Remove/install exterior detachable parts and interior trim for replacing outside part of left B-pillar

AR60.00-S-0026E

Remove/install exterior detachable parts and interior trim for replacing outside part of left B-pillar

04.03.2020

Model

447, 448

except code T19 (Sliding door left)

Modification notes

27.02.2020

Method extended

Operation steps 2, 6.1, 6.2,

1

Cable tie

2

Subharness

 Danger

Risk of death caused by vehicle slipping or toppling off of the lifting platform.

Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer.

AS00.00-Z-0010-01A

 Danger

Risk of death when working on component parts and systems with U >= 30 V alternating voltage (AC) or U >= 60 V direct voltage (DC)

Do not touch damaged or defective live component parts and lines or non-insulated electrical connections and lines.Typ 447 mit Motor 780

AS00.00-Z-0035-01A

Topical note

General information on vehicles with high-voltage on-board electrical system and/or lithium-ion battery and/or gaseous-fuel drive system as well as personal protective equipment

Typ 447 mit Motor 780

AH00.00-Z-0300-01A

Topical note

Notes on carrying out repair work in the vehicle interior

AH68.00-N-0001-01S

 

Remove/install

1

Remove outer detachable parts and inner trims to replace the side wall.

AR60.00-S-0020EA

2

Remove mounting rail of the longitudinal member panel in the repair area.

Model 447.8, 448.8

AR88.80-S-6005CH

 On the damaged side of the vehicle.

3

Remove door sill.

AR68.30-S-4100E

4

Release cable ties (1) and place subharness (2) to one side.

 Installation: Replace cable ties (1).

5

Remove seat belt from B-pillar.

AR91.40-S-1015E

6.1

Remove HV battery module.

Model 447 with engine 780.701
* Applies to Europe only

AR47.70-S-0001F

6.2

Remove high-voltage battery

Model 447 with engine 780.702
* Applies to Europe only

AR47.70-S-0002G

7

Install in the reverse order.