S60.00-4694-06
S60.00-4715-09
1 | Fuse box | 5 | Nut | 8 | Nut | ||
2 | Cover | 6 | Screw | 9 | Insulation | ||
3 | Lock clip | 7 | Ground terminal point | K40/10 | Engine compartment fuse and relay module | ||
4 | Lock |
Danger | Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer. | |
Danger | Risk of death when working on component parts and systems with U >= 30 V alternating voltage (AC) or U >= 60 V direct voltage (DC) | Do not touch damaged or defective live component parts and lines or non-insulated electrical connections and lines.Model 447 with engine 780 | |
Topical note | General information on vehicles with high-voltage on-board electrical system and/or lithium-ion battery and/or gaseous-fuel drive system as well as personal protective equipment | Model 447 with engine 780 | |
| Remove/install | ||
1 | Remove detachable parts to replace the front top longitudinal member. | ||
2 | Remove front suspension strut. | ||
At damaged side of vehicle. | |||
3 | Remove cover (2). | If right side of vehicle is damaged. | |
To do so, release the locking clamps (3). | |||
4 | Release lock (4). | If right side of vehicle is damaged. | |
5 | Unhook engine compartment fuse and relay module (K40/10). | If right side of vehicle is damaged. | |
For this purpose swivel engine compartment fuse and relay module (K40/10) upwards out of the fuse box (1). | |||
6 | Remove fuse box (1). | If right side of vehicle is damaged. | |
To do this, remove nut (5) and remove screws (6). | |||
7 | Remove ground support point (7). | If right side of vehicle is damaged. | |
8 | Remove insulation (9). | If left side of vehicle is damaged. | |
To do this, remove expansion nut (8). | |||
9 | Install in the reverse order. |
Referenced documents
- ah0000z030001a General information on vehicles with high-voltage on-board electrical system and/or lithium-ion battery and/or gaseous-fuel drive system as well as personal protective equipment
- ar3225s1017e Remove/install the suspension strut
- ar6000s0016e Remove/install detachable parts for replacing upper front longitudinal member
- as0000z001001a Risk of death caused by vehicle slipping or toppling off of the lifting platform.
- as0000z003501a Risk of death when working on component parts and systems with U >= 30 V alternating voltage (AC) or U >= 60 V direct voltage (DC)