AR46.30-P-0100A | Checking oil pressure of power steering pump | 19.1.10 |
MODEL 129.058 /060 /061 /063 /066 /067 /076, 140, 170.435 /444 /445 /447 /449, 202.01 /020 /022 /023 /024 /025 /028 /07 /080 /082 /083 /085 /12 /18, 208.33 /34 /43 /44, 210.003 /004 /010 /015 /017 /025 /03 /045 /05 /072 /210 /215 /217 /225 /235 /245 /272 /610 /617
MODEL 202.133 /134 /193 /194 with CODE (480) Rear axle level control system
P46.30-2057-01
P46.30-0216-01
| Removing | ||
1.1 | Extract fluid out of the power steering pump's fluid reservoir | Model 129, 140, 202, 208 with and without level control, Model 210 without level control or ADS | |
2.1 | Detach feed line from reservoir | Model 210 with level control or ADS | |
3 | Unscrew high pressure expansion hose (30i) on power steering pump | On vehicles with tandem pump, the testing unit must not be connected to the radial piston pump | |
4 | Connect testing unit (039) between power steering pump and high-pressure expansion hose (30i) | Testing unit | |
Connection fitting | |||
Connection fitting | |||
Connection fitting, on power steering pumps with O-ring seal on pressure hose | |||
5.1 | Remove clamp from feed line from reservoir | Model 210 with level control or ADS | |
6 | Fill supply reservoir | Model 129, 140, 208, model 202 up to 31.8.95 | |
Model 170, 210, model 202 as of 1.9.95 | |||
Danger! | Risk of accident caused by vehicle starting off by itself when engine is running. Risk of injury caused by contusions and burns during starting procedure or when working near the engine as it is running | Secure vehicle to prevent it from moving by itself. | |
7 | Engine ON | ||
8 | Increase engine speed to approx. 1000 rpm | ||
| Checking | ||
9 | Close tap (70b) and check maximum operating pressure | Perform test only for a short time, so that oil temperature does not increase beyond its permitted level | |
Model 129, 140, 170, 202, 208, 210 | |||
10 | Engine OFF | ||
11.1 | Extract fluid out of the power steering pump's fluid reservoir | Model 129, 140, 202, 208 with and without level control, Model 210 without level control or ADS | |
12.1 | Detach feed line from reservoir | Model 210 with level control or ADS | |
13 | Disconnect testing unit (039) | ||
14 | Screw high pressure expansion hose (30i) onto the power steering pump | | |
15.1 | Remove clamp from feed line from reservoir | Model 210 with level control or ADS | |
16 | Fill power steering pump and bleed | Models 129, 140, 170, 202, 208 | |
Model 210 | |||
17 | Inspect power-steering pump for leaks | Visual inspection |
Power steering pump test specifications
Number | Designation | Model 129.058/ | Model 129.067 | Model 129.076 | Model 140.028/ | |
BE46.30-P-1001-01A | Pressure in power steering pump | bar | 105-115 | 110-120 | 119-131 | 100-110 |
Power steering pump test specifications
Number | Designation | Model 140.04/05/ | Model 170.435/444/ | Model 202.018/ | Model 202.018/020/ | |
BE46.30-P-1001-01A | Pressure in power steering pump | bar | 119-131 | 92-100 | 90-100 | 90-100 |
Power steering pump test specifications
Number | Designation | Model 202.028/ | Model 202.028/ | Model 202.121/ | Model 202.133/ | |
BE46.30-P-1001-01A | Pressure in power steering pump | bar | 105-115 | 105-115 | 90-100 | 107-115 |
Power steering pump test specifications
Number | Designation | Model 208.335/34 | Models 210.003/ | Model 210.035/037/23/ | Model 210.072 / | |
BE46.30-P-1001-01A | Pressure in power steering pump | bar | 90-100 | 107-115 | 92-100 | 110-120 |
Power steering pump
Number | Designation | Model 129.058/ | Model 140 | ||
BA46.30-P-1003-01A | High-pressure expansion hose to power steering pump | M141.5 | Nm | - | - |
M161.5 | Nm | 45 | 50 | ||
Power steering pump
Number | Designation | Model 170 | Model 202.018/020/022/ | ||
BA46.30-P-1003-01A | High-pressure expansion hose to power steering pump | M141.5 | Nm | - | 30 |
M161.5 | Nm | 45 | 50 | ||
Power steering pump
Number | Designation | Models 202.133/134/ | Model Series 208.335/ | ||
BA46.30-P-1003-01A | High-pressure expansion hose to power steering pump | M141.5 | Nm | - | 30 |
M161.5 | Nm | 45 | 40 | ||
Power steering pump
Number | Designation | Model 210.003/004/010/ | ||
BA46.30-P-1003-01A | High-pressure expansion hose to power steering pump | M141.5 | Nm | - |
M161.5 | Nm | 45 | ||
140 589 17 63 00
210 589 00 71 00
124 589 06 21 00
124 589 19 63 00
Connection fitting
Connection fitting
Tester
Hand pump
000 589 40 37 00
Clamping device
210 589 09 63 00
Connection fitting
Referenced documents
- ap4600p4611ba Checking and adjusting oil level in power steering
- ap4600p4611bb Check and correct power steering fluid level
- ar4630p0010a Fill power steering pump and bleed
- ar4630p0010b Fill power steering pump and bleed
- as0000z000501a Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.