Removing and installing steering wheel lock

AR46.10-P-0900FF

Removing and installing steering wheel lock

16.9.03

 

Removal/installation

1

Rotate the steering wheel (1) until the steering wheel lock (2) latches

2

Remove steering wheel (1)

AR46.10-P-0100FF

3

Remove instrument cluster (A1)

AR54.30-P-6015FF

4

Remove transponder coil (L11)

AR80.35-P-4515FF

5

Remove lock cylinder

AR46.10-P-0800FF

6

Disconnect electrical connectors (5)

7

Disconnect electrical connector (4) from ignition switch (S2/1)

8.1

Unscrew bolt (3) of ignition switch (S2/1)

Only when replacing the steering wheel lock (2).

9.1

Remove ignition switch (S2/1) from steering wheel lock (2)

Only when replacing the steering wheel lock (2).

10

Unclip retaining clip (9)

11

Drill out screw heads of shear bolts (7) of steering wheel lock (2)

 Carefully protect the working area from damage before drilling out the screw heads. Do not apply pressure to the instrument panel (6) in the area of the instrument cluster (A1), otherwise the instrument panel (6) may be damaged.

Drill (electric/pneumatic)

*WE58.40-Z-1001-03A

 Installation: Remove drill shavings and replace shear bolts (7).

Wet/dry vacuum cleaner

*WE58.40-Z-1005-03A

12

Remove steering wheel lock (2)

 Installation: Position steering wheel lock (2) so that the locking bar guide (square) engages in the square window in the jacket tube (8).

13

Install in the reverse order

WE58.40-Z-1001-03A

Drill (electric/pneumatic)

WE58.40-Z-1005-03A

Wet/dry vacuum cleaner