ar4610p0800ff

Removing and installing lock cylinder

Type ar · topic 46.10 · version 0100 · 2004-01-08

Applies to: MODELS 454.0

Where it sits

Function group 2 Chassis › 46 Steering › 46.10 Steering wheel, jacket tube, steering shaft, steering lock — Series 454 (models 0**)

EinPAS 22 Steering › 22.15 Power steering › 22.15.40 Steering wheel/steering column/steering column tube/steering lock — Series 454 (models 0**)

AR46.10-P-0800FF

Removing and installing lock cylinder

28.11.03

MODELS 454.0

Removing and installing lock cylinder

P54.25-3779-04

1 Ignition switch lock cylinder

2 Steering lock

3 Locking pin

Removing and installing lock cylinder

P54.25-3778-08

1 Ignition switch lock cylinder

4 Ignition key

5 Contact leaves

2 Steering lock

3 Locking pin

Remove

1

Remove steering column switch

AR54.25-P-2801FF

2

Insert ignition key (4) in ignition switch lock cylinder (1) and rotate into
position "ACC"

Position "ACC" is marked on the ignition switch lock cylinder (1).

3

Press in locking pin (3) of ignition switch lock cylinder (1) using a suitable tool

4

Pull ignition switch lock cylinder (1) out of the steering lock (2) and remove

Install

5

Insert ignition switch lock cylinder (1) into the steering lock (2) and push in slowly until the locking pin (3) latches in the steering lock (2)

When inserting with the front area of the ignition switch lock cylinder (1) press the contact leaves (5) to one side and press in the locking pin (3) of the ignition switch lock cylinder (1) using a suitable tool.

6

Remove ignition key (4)

7

Install steering column switch

AR54.25-P-2801FF

Referenced documents