ar4020t0400a

Aligning rear axle

Type ar · topic 40.20 · version 0100 · 2006-07-26

Applies to: MODEL NMB613.355 /358 /388 /455 /485 /36, 671

Where it sits

Function group 2 Chassis › 40 Wheels, chassis alignment check › 40.20 Chassis measurement — Series 613 (models 355, 358, 36*, 388, 455, 485) · Series 671

EinPAS 20 Chassis › 20.10 Wheel alignment › 20.10.20 Diagnosis/testing/measurement/adjusting — Series 613 (models 355, 358, 36*, 388, 455, 485) · Series 671

AR40.20-T-0400A

Aligning rear axle

1.7.05

MODEL NMB613.355 /358 /388 /455 /485 /36, 671

 Danger!	Risk of injury. Moving parts can pinch, crush or, in extreme cases even sever extremities.	Keep body parts and limbs well clear of moving parts.	AS00.00-Z-0009-01A
	General information on chassis alignment	MODELS 613, 671	AH40.20-N-1000-01B
1	Drive vehicle to alignment check bay	 The chassis alignment must be performed on a horizontal, level and clean underground. An alignment check bay with a workshop pit is a substantial advantage.
2	Align front and rear section of articulated bus	Model 671.3 only	AR40.20-T-0201-02A
	Cord assembly for measuring vehicle frame	Type 671.3	WF58.50-Z-3130-01B
3	Check prerequisites for chassis alignment		AR40.20-T-0050A
4	Move vehicle to driving level	 See operator's manual. Ensure there is a sufficient supply of compressed-air throughout the entire measuring procedure.
	Measure
5	Aligning rear axle	 Observe wheel alignment manufacturer's operating instructions. Only the driveline angle can be set on the rear axle.	*BE40.20-N-1001-21A
6	Set driveline angle on rear axle	 Only perform when the driveline angle does not match and has to be adjusted.
		Model 613.364/365 except HOSE rear axle
		Type 671	AR40.20-T-0200-14A
		Model 613 with rear axle 745.86/99, 746.217	AR40.20-T-0200-14B
		Model 613.364/365 with HOSE rear axle, model 613.367/368 with rear axle 746.211/216	AR40.20-T-0200-14C

Rear axle driveline angle

Number	Designation		Model 613 with rear axle 745.86/99, 746.217	Model 613.367/368 with rear axle 746.211/216	Model 613.364/365	Model 671


BE40.20-N-1001-21A	Driveline angle (angular alignment) of rear axle	°	0° (10')	0° (12')	0° (12')	0° (10')

Referenced documents

ah4020n100001b General notes on chassis alignment
ar4020t0050a Check prerequisites for wheel alignment
ar4020t020014a Adjust driveline angle
ar4020t020014b Adjust driveline angle
ar4020t020014c Adjust driveline angle
ar4020t020102a Align front and rear section of articulated bus
as0000z000901a Risk of injury. Moving parts can pinch, crush or, in extreme cases even sever extremities.
wf5850z313001b Cord assembly for measuring vehicle frame