ar4000p0202xg

General information on vehicle level measurement

Type ar · topic 40.00 · version 0101 · 2018-10-23

Applies to: Model 463 as of model year 2019

Where it sits

Function group 2 Chassis › 40 Wheels, chassis alignment check › 40.00 General — Series 463

EinPAS 20 Chassis › 20.10 Wheel alignment › 20.10.20 Diagnosis/testing/measurement/adjusting — Series 463

AR40.00-P-0202XG

General information on vehicle level measurement

30.07.2018

Model

463

as of model year 2019

Check

1

Check condition of vehicle.

For the vehicle level check, all vehicle parts must be installed and the vehicle completed and in a ready to drive condition. Do not load the vehicle.

2

Visually inspect tires for wear and damage; visually inspect tire tread.

3

Visually inspect rims for damage.

4

Check and correct tire pressure.

5

Visually inspect vehicle underside for damage, corrosion to suspension, chassis and supporting body panels, and leaks at major assemblies and lines.

6

Raise vehicle at side at jack support point and check wheel bearing play without dial indicator.


Do not raise the vehicle at the axles.
Otherwise the axles will be damaged.

7

Check condition of mechanical steering components.

AP46.00-P-4651GA

8

Check front axle joints for play and check seal bellows for damage.

AP33.10-P-3358GA

9

Check rear axle joints for play and check seal bellows for damage.

AP35.20-P-3552GA

10

Check condition of shock absorbers and springs.

AP32.25-P-3255GA

11

Drive vehicle onto measuring station and secure against rolling away.

The vehicle lift must be horizontal at the measuring position.

12

Move vehicle to driving level.

Referenced documents