746 589 00 43 00
Insertion tool
For installing the cassette-type sealing ring, use the following individual tools from set insertion tool:
Thrust piece (1), with end number 01
Assembly sleeve (2), with end number 02
Thrust spindle (3), with end number 03
Counternut (4)
Threaded bushing (5), with end number 05
W35.30-1202-11
1 | Screw thrust spindle (3) into assembly sleeve (2) up to thread end (A) and secure in this position with the counternut (4). |
W35.30-1203-10
2 | Screw assembly sleeve (2) with thrust spindle (3) up to stop on shaft of drive pinion (11) in axle drive housing (8) and loosen assembly sleeve (2) by a 1/4 turn again. |
3 | Insert cassette-type sealing ring (7) into axle drive housing (8). |
4 | Align cassette-type sealing ring (7) parallel and centered. |
W35.30-1204-02
5 | Position thrust piece (1) over thrust spindle (3) on cassette-type sealing ring (7). |
When doing so, do not tilt thrust piece (1) and cassette-type sealing ring (7). |
6 | Screw threaded bushing (5) onto thrust spindle (3) up to contact surface at thrust piece (1). |
W35.30-1205-02
7 | Press cassette-type sealing ring (7) up to contact into the axle drive housing (8); to do this, turn threaded bushing (5) clockwise and counterhold thrust spindle (3) while doing so. |
Observe uniform completion (B) of cassette-type sealing ring (7) in axle drive housing (8). |
8 | Unscrew threaded bushing (5) and remove thrust piece (1). |
W35.30-1206-11
9 | Do not remove assembly sleeves (2) with thrust spindle (3) from shaft of drive pinion (11) in axle drive housing (8). |
They are required for installation of the drive flange. |
W35.30-1208-02