ar3530p062002pi

Extract rear axle shaft from rear axle center assembly, press in

Type ar · topic 35.30 · version 0100 · 2005-05-10

Applies to: MODEL 203.040 /042 /043 /046 /052 /240 /242 /243 /246 /252 /730 /740 /742 /743 /746 HA-Mittelstück 187 MODEL 203.054 /056 /254 /256 /756, 209.354 /356 /454 /456 HA-Mittelstück 200'

Where it sits

Function group 2 Chassis › 35 Rear axle › 35.30 Final drive, drive shafts — Series 203 (models 040, 042, 043, 046, 052, 054, 056, 240, 242, 243, 246, 252, 254, 256, 730, 740, 742, 743, 746, 756) · Series 209 (models 354, 356, 454, 456)

EinPAS 17 Drivetrain/axle › 17.51 Rear axle › 17.51.51 Axle shaft/drive shaft — Series 203 (models 040, 042, 043, 046, 052, 054, 056, 240, 242, 243, 246, 252, 254, 256, 730, 740, 742, 743, 746, 756) · Series 209 (models 354, 356, 454, 456)

AR35.30-P-0620-02PI

Extract rear axle shaft from rear axle center assembly, press in

Extract rear axle shaft from rear axle center assembly, press in

P35.30-2020-01

Pull out rear axle shaft

1 Using a suitable tool (e.g. screwdriver, assembly lever), press rear axle shaft (37) out of the rear axle center assembly.

When pressing out the rear axle shaft (37) do not damage the radial sealing ring to prevent leaks. Rear axle shafts (37) with damaged joints or boots must be replaced to guarantee proper functioning.

Extract rear axle shaft from rear axle center assembly, press in

P35.30-2021-01

Press in rear axle shaft

2 Press in rear axle shaft (37) until circlip (37g) is felt to engage.

Align the joint ring horizontally before inserting, otherwise the splined profile can tilt and become damaged during insertion.

When pressing the rear axle shaft (37) into the rear axle center assembly do not damage the radial sealing ring to prevent leaks.

The joint ring must close flush with the rear axle housing.