Drain/pour in front axle gear oil

AR33.30-P-0002EQ

Drain/pour in front axle gear oil

16.12.2019

Model

293

1

Drain screw

2

Oil filler plug

 Danger

Risk of death when working on component parts and systems with U >= 30 V alternating voltage (AC) or U >= 60 V direct voltage (DC)

Do not touch damaged or defective live component parts and lines or non-insulated electrical connections and lines.

AS00.00-Z-0035-01A

 Caution

Risk of injury to skin and eyes due to handling of transmission oil. Health risk caused by swallowing transmission oil

Wear protective gloves, protective clothing and safety glasses.
Do not pour transmission oil into beverage bottles.

AS00.40-Z-0001-01A

Topical note

General information on vehicles with high-voltage on-board electrical system and/or lithium-ion battery and/or gaseous-fuel drive system as well as personal protective equipment

AH00.00-Z-0300-01A

Drain off

1

Remove rear engine compartment lining.

AR61.20-P-1105EQ

2

Clean area around oil filler screw (2) and drain screw (1).

Assembly cleaner

*BR00.45-Z-1028-04A

3

Remove oil filler screw (2).

4

Remove drain screw (1) and collect transmission oil in a suitable container.



Clean

5

Clean oil filler screw (2) and drain screw (1).

Loctite 7063 (400 ml) cleaning spray

*BR00.45-Z-1046-04A

6

Clean threaded holes of oil filler screw (2) and drain screw (1) in front axle differential.

Loctite 7063 (400 ml) cleaning spray

*BR00.45-Z-1046-04A

Pour in

7

Screw in drain screw (1).

 Check O-ring on drain screw (1) for damage and check it is seated correctly.

 Drain screw, front/rear axle drive module

*BA08.10-P-1006-01J

If there is a problem,



Position O­ring correctly or install new drain screw (1) with O-ring.

8

Add transmission oil to hand pump.

 Electric drive

*BF33.10-P-1001-01A

 Hand pump

*210589007100

9

Screw in oil filler screw (2).

 Check O-ring on oil filler screw (2) for damage and check it is seated correctly.

 Oil filler screw, front/rear axle drive module

*BA08.10-P-1005-01J

If there is a problem,



Position O­ring correctly or install new oil filler screw (2) with O-ring.

10

Install rear engine compartment lining.

AR61.20-P-1105EQ

 Electric motor

Number

Designation

Model 293 with engine 780

BA08.10-P-1005-01J

Oil filler screw, front/rear axle drive module

Nm

35

 Electric motor

Number

Designation

Model 293 with engine 780

BA08.10-P-1006-01J

Drain screw, front/rear axle drive module

Nm

35

 Front axle

Number

Designation

Model 293 with engine 780

BF33.10-P-1001-01A

Electric drive

Filling capacity

Liter

1

Sheet

BB00.40-P-0236-24A

Repair materials

Number

Designation

Order number

BR00.45-Z-1028-04A

Assembly cleaner

A 000 986 56 01

BR00.45-Z-1046-04A

Loctite 7063 (400 ml) cleaning spray

A 001 986 71 71 09