ar3222d2006a

Removing and installing actuating rod of rear axle height control valve

Type ar · topic 32.22 · version 0100 · 1996-09-24

Applies to: MODEL 668, 670 with CODE (CE2) rear air suspension

Where it sits

Function group 2 Chassis › 32 Suspension › 32.22 Air suspension — Series 668 · Series 670

EinPAS 20 Chassis › 20.16 Suspension › 20.16.13 Line/hose/valve — Series 668 · Series 670

AR32.22-D-2006A

Removing and installing actuating rod of rear axle height control valve

25.6.96

MODEL 668, 670 with CODE (CE2) rear air suspension

Removing and installing actuating rod of rear axle height control valve

D32.22-0006-06

Shown: left-hand side of vehicle, right-hand side is the same

4 Height control valve

5 Pressure line to reservoir

7 Height control valve actuating rod

8 Actuating lever

9 Retainer

10 Nut

Removal, installation

1

Unscrew actuating rod (7) on top of actuating lever (8).

The pressure in the air suspension bellows is also eliminated by moving the actuating lever (8) downwards.

2

Unscrew actuating rod (7) on bottom of retainer (9) and remove.

Installation: adjust the length of the new control rod to the dimension of the old one.

3

Install in reverse order

4

Check air suspension for leaks

AR32.22-D-8000A

5

Check vehicle level and adjust, if necessary.

AR32.22-D-7000A

Referenced documents