D31.35-A001-79
1 | Impact absorber | 2 | Screw | 3 | Screw |
Danger | Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer. | |
Danger | Risk of death when working on component parts and systems with U >= 30 V alternating voltage (AC) or U >= 60 V direct voltage (DC) | Do not touch damaged or defective live component parts and lines or non-insulated electrical connections and lines. | |
Topical note | Notes on self-locking nuts and bolts | ||
Topical note | General information on handling vehicles with high-voltage on-board electrical system and/or lithium-ion battery and/or gaseous-fuel drive system | ||
| Remove/install | ||
1 | Remove lower engine compartment paneling. | ||
2 | Remove screw/bolts (3). | Screw, impact absorber to integral carrier holder | |
3 | Remove impact absorber (1). | To do this, remove screws (2). | |
Screw, impact absorber to body | |||
4 | Install in the reverse order. |
Referenced documents
- ah0000n000101a Notes on self-locking nuts and bolts
- ah0000z030001a General information on vehicles with high-voltage on-board electrical system and/or lithium-ion battery and/or gaseous-fuel drive system as well as personal protective equipment
- ar6120d1105ts Remove/install lower engine compartment lining
- as0000z001001a Risk of death caused by vehicle slipping or toppling off of the lifting platform.
- as0000z003501a Risk of death when working on component parts and systems with U >= 30 V alternating voltage (AC) or U >= 60 V direct voltage (DC)