1 | Selector lever Bowden cable |
N15/5 | Electronic selector lever module control unit |
P27.60-3400-04
| Remove/install | ||
Danger | Risk of death when working on component parts and systems with U >= 30 V alternating voltage (AC) or U >= 60 V direct voltage (DC) | Do not touch damaged or defective live component parts and lines or non-insulated electrical connections and lines. | |
Topical note | General information on handling vehicles with high-voltage on-board electrical system and/or lithium-ion battery and/or gaseous-fuel drive system | ||
1 | Apply parking brake and set selector lever to position "N" | ||
2 | Turn transmitter key (A8/1) in EIS control unit (N73) to position "0" | ||
3 | Remove cover on center console | ||
4 | Remove ashtray | ||
5 | Remove selector lever Bowden cable (1) from electronic selector lever module control unit (N15/5) and hook in again | ||
The selector lever Bowden cable (1) is adjusted by unhooking the electronic selector lever module control unit (N15/5) and hooking it in again. | |||
6 | Install in the reverse order |
Referenced documents
- ah0000z030001a General information on vehicles with high-voltage on-board electrical system and/or lithium-ion battery and/or gaseous-fuel drive system as well as personal protective equipment
- ar2760p093001ez Detach/attach selector lever Bowden cable at shift unit
- ar6820p2350ak Remove/install cover on center console
- ar6820p2420ak Remove/install stowage compartment or ashtray housing
- as0000z003501a Risk of death when working on component parts and systems with U >= 30 V alternating voltage (AC) or U >= 60 V direct voltage (DC)