Remove/install oil level check switch

AR18.40-S-5113CD

Remove/install oil level check switch

22.01.2019

Model

415 with engine 607, 608

Modification notes

21.01.2019

Method extended

Operation steps 2, 4, 7

Shown with engine 607

1

Electrical connector

S43

Oil level check switch

 Danger

Risk of death caused by vehicle slipping or toppling off of the lifting platform.

Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer.

AS00.00-Z-0010-01A

 Caution

Risk of injury to skin and eyes due to handling of engine oil. Risk of poisoning caused by swallowing engine oil

Wear protective gloves, protective clothing and safety glasses.
Do not fill engine oil into beverage containers.

AS18.00-Z-0001-01A

Topical note

Notes on avoiding damage through contamination and foreign objects

AH00.00-P-5000-01A

 

Remove/install

1

Remove bottom engine compartment paneling.

AR61.20-S-1105C

 Installation: Only install lower engine compartment paneling after leak test.

2

Remove front crossmember.

Model 415 with engine 608

AR31.30-S-4115C

3

Disconnect electrical connector (1).

4

Unscrew oil level check switch (S43).

 Collect escaping engine oil. Seal opening of the oil pan.

 Record plug

*129589009100

5

Install in the reverse order.



Check

6

Check engine oil level.


The engine oil level must not lie above the maximum marking.
Engine damage can occur otherwise.

If engine oil level is incorrect,



Correct engine oil level.



Low SPAsh multigrade service engine oils (specification 228.51)

BB00.40-P-0228-51A



Low SPAsh multigrade service engine oils (specification 226.51)

BB00.40-P-0226-51A

 Warning

Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.

Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts.

AS00.00-Z-0005-01A

7

Check for leaktightness when engine is running.

 Visual inspection only.