0100 | Diagnostic system |
X11/4 | Diagnostic connector |
P15.40-2337-03
| Check | ||
1 | Check the condition of battery and replace if necessary |
| |
2 | Attach diagnostic system (0100) at diagnostic connector (X11/4) | ||
| Engine 642 in model 238 | ||
| Engine 642 in model 213, 253 | ||
Warning | Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. | Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. | |
3 | Start engine and warm up to normal operating temperature (approx. 80 °C) | ||
4 | Check alternator with diagnostic system (0100) | In case of a complaint | |
| |||
Replace alternator. | |||
| |||
| |||
5 | Turn off engine | ||
6 | Disconnect diagnostic system (0100) | ||
| Engine 642 in model 213, 253 | ||
| Engine 642 in model 238 |
Referenced documents
- ad0000p200004b Connect STAR DIAGNOSIS and read out fault memory
- ad0000p200006lwo Connect/disconnect diagnostic unit
- ar1540p5032lwb Remove/install alternator
- ar1540p5032ogw Remove/install alternator
- ar5410p1129lw Check condition of battery
- as0000z000501a Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.