AR09.10-B-8030A | Remove/install air intake hose | 12.02.16 |
Cumbustion engine 904.925
Cumbustion engine 904.965
B09.10-0001-01
B09.10-0002-01
1 Flexible air intake tube
2 Air filter
3 Turbocharger
4 Air compressor tube (intake)
5 Engine breather tube
A Mounting position:Front engine bus
B Mounting position:Trucks
| Remove and install | ||
Danger! | Risk of injury by seizing or compression while tilting the cab | Do not enter and do not allow others to enter the area below the cab while it is tilting in either direction. Always tilt the cab to its final position and lock the cab by means of the safety device. | |
1.1 | Tilting the cab | Trucks with advanced cab. | |
Danger! | Risk of injuryby seizing or compression when opening or closing the engine hood | Keep area clear of people and objects while tilting the engine hood. | |
1.2 | Tilt the engine hood | Trucks w/ semi-advanced cabin. | |
2 | Disconnect air compressor tube (4) from flexible air intake tube (1) | ||
3 | Disconnect breather tube (5) from flexible air intake tube (1) | ||
4 | Disconnect flexible air intake tube (1) from air filter housing connection (2) | ||
5 | Disconnect flexible air intake tube (1) from turbocharger connection (3) | ||
6 | Install in reverse order | Check condition of all fastening clamps. Replace as necessary. |
Referenced documents
- ar6080b0010b Tilt cab to repair position, tilt back
- ar8840b1000a Opening engine hood, moving to upright position and closing
- as6080b000101a Risk of injury caused by body parts being pinched or crushed as cab is tilted
- as8840b000101a Risk of injury caused by pinching and crushing when opening and closing engine hood