ar6080b0010b

Tilt cab to repair position, tilt back

Type ar · topic 60.80 · version 0101 · 2019-10-16

Applies to: Model 932.315 Model 934.241/251 except code FK2 (Cab tilting mechanism, electrohydraulic) Model 936.315 Model 938.142 except code FK2 (Cab tilting mechanism, electrohydraulic)

Where it sits

Function group 3 Body › 60 Body - general › 60.80 Cab, cab mounting — Series 932 (models 315) · Series 934 (models 241, 251) · Series 936 (models 315) · Series 938 (models 142)

EinPAS 35 Body/frame/detachable parts › 35.50 Cab suspension system/-cab tilt system/-air suspension › 35.50.40 Cab mounting/cab tilt system — Series 932 (models 315) · Series 934 (models 241, 251) · Series 936 (models 315) · Series 938 (models 142)

AR60.80-B-0010B

Tilt cab to repair position, tilt back

14.10.2019

Model

932.315

Model

934.241/251

except code FK2 (Cab tilting mechanism, electrohydraulic)

Model

936.315

Model

938.142

except code FK2 (Cab tilting mechanism, electrohydraulic)

Tilt cab to repair position, tilt back

1

Valve lever

2

Hex nut

3

Warning adhesive

B60.80-A000-12

Tilt

Warning

Risk of injury caused by body parts being pinched or crushed as cab is tilted

Ensure that no one is within the tilting range of the cab as it is being tilted. Always tilt the cab all the way to the end position and secure it with the safety strut..

AS60.80-Z-0001-01A

1

Open the access compartment to the tilt pump in the right side

2

Move the valve lever (1) to the tilt position

3

Insert the hydraulic pump lever in the hex nut (2) from the tilt pump

Use the wheel wrench.

4

Move the lever up and down until the cab tilt in the end position

Return

5

Move the valve lever (1) to the return position

6

Move the lever up and down until the cab return in the end position

The cab automatically locks.

Is possible to hear the blocking device lock..

If you feel the lever resist:

Verify the correct position of the valve lever (1) in the tilt pump.

7

Close the access compartment to the tilt pump down in the right side

You should hear the hook.

8

Start the engine

Make sure the cab is correctly locked in the working position, observing the corresponding control light on the dashboard.

If the control light remains lit with the engine running:

Turn the engine off, tilt the cab forward again and put it back to the work position.

Referenced documents