Shown with engine 780.701 |
1 | Coolant temperature sensor |
2 | Electrical connector |
3 | Catch spring |
4 | Connection fitting |
S08.50-A005-76
1 | Coolant temperature sensor |
5 | O-ring |
S08.50-A008-72
Danger | Risk of death when working on component parts and systems with U >= 30 V alternating voltage (AC) or U >= 60 V direct voltage (DC) | Do not touch damaged or defective live component parts and lines or non-insulated electrical connections and lines. | |
Warning | Risk of injury. Skin or eye injuries may result when handling hot or glowing objects. | Wear protective gloves, protective clothing and safety glasses, if necessary. | |
Warning | Risk of injury to skin and eyes suffering scalding from contact with hot coolantspray. Risk of poisoning from swallowing coolant. | Do not open cooling system unless coolant temperature is below 90 °C. Open cap slowly and release the pressure. Do not pour coolant into beverage containers. | |
Caution | Risk of injury caused by scraping or cutting body parts on sharp vehicle parts | Always wear protective gloves when working on or near sharp and non-deburred vehicle parts. | |
Topical note | Notes on avoiding damage through contamination and foreign objects | ||
Topical note | General information on vehicles with high-voltage on-board electrical system and/or lithium-ion battery and/or gaseous-fuel drive system as well as personal protective equipment | ||
| Remove/install | ||
1 | Drain coolant for cooling the electric motor. | ||
Model 447 with engine 780.702 | |||
2 | Release and disconnect the electrical connector (2). | ||
3 | Remove catch spring (3). | ||
4 | Remove coolant temperature sensor (1) from the connection fitting (4). | Collect escaping coolant. | |
Commercially available devices/tools | |||
Record plug | |||
| Check | ||
5 | Check coolant temperature sensor (1) and O-ring (5) for damage. | If damage is present, | |
| |||
Replace coolant temperature sensor (1). | |||
6 | Install in the reverse order. | ||
| Check | ||
7 | Check cooling system for the electric motor in the area of the coolant temperature sensor (1) for leak tightness. |
129 589 00 91 00
Record plug
Referenced documents
- ah0000p500001a Notes on avoiding damage through contamination and foreign objects
- ah0000z030001a General information on vehicles with high-voltage on-board electrical system and/or lithium-ion battery and/or gaseous-fuel drive system as well as personal protective equipment
- ar0850s0010f Check cooling system for electric motor for leak tightness
- ar0850s0020f Drain/fill coolant for cooling electric motor
- as0000z000201a Risk of injury. Skin or eye injuries may result when handling hot or glowing objects.
- as0000z001701a Risk of injury caused by scraping or cutting body parts on sharp vehicle parts
- as0000z003501a Risk of death when working on component parts and systems with U >= 30 V alternating voltage (AC) or U >= 60 V direct voltage (DC)
- as2000z000101a Risk of injury to skin and eyes suffering scalding from contact with hot coolantspray. Risk of poisoning from swallowing coolant.