Remove/install coolant fill level sensor · ar0840d0003te · Mercedes-Benz WIS

AR08.40-D-0003TE

Remove/install coolant fill level sensor

26.11.2019

Engine

780.703 in model 910

 Danger	Risk of death when working on component parts and systems with U >= 30 V alternating voltage (AC) or U >= 60 V direct voltage (DC)	Do not touch damaged or defective live component parts and lines or non-insulated electrical connections and lines.	AS00.00-Z-0035-01A
 Warning	Risk of injury to skin and eyes suffering scalding from contact with hot coolantspray. Risk of poisoning from swallowing coolant.	Do not open cooling system unless coolant temperature is below 90 °C. Open cap slowly and release the pressure. Do not pour coolant into beverage containers. Wear protective gloves, protective clothing and safety glasses.	AS20.00-Z-0001-01A
Topical note	General information on handling vehicles with high-voltage on-board electrical system and/or lithium-ion battery and/or gaseous-fuel drive system		AH00.00-Z-0300-01A
 	Remove/install
1	Remove the main circuit coolant expansion reservoir.		AR08.50-D-0006TE
		 The coolant fill level sensor is an integral part of the main circuit coolant expansion reservoir and cannot be ordered separately.
2	Install in the reverse order.

ah0000z030001a General information on vehicles with high-voltage on-board electrical system and/or lithium-ion battery and/or gaseous-fuel drive system as well as personal protective equipment
ar0850d0006te Remove/install coolant expansion reservoir of main circuit
as0000z003501a Risk of death when working on component parts and systems with U >= 30 V alternating voltage (AC) or U >= 60 V direct voltage (DC)
as2000z000101a Risk of injury to skin and eyes suffering scalding from contact with hot coolantspray. Risk of poisoning from swallowing coolant.