Move engine to basic position and arrest

AR05.10-D-7620-01TSF

Move engine to basic position and arrest

 Caution

Risk of injury to skin and eyes due to handling of engine oil. Risk of poisoning caused by swallowing engine oil

Wear protective gloves, protective clothing and safety glasses.
Do not fill engine oil into beverage containers.

AS18.00-Z-0001-01A

Engine

651 in model 910

1

Attach  counterholder to bolts of belt pulley (4).

2

Turn engine using  counterholder in direction of engine rotation and set to ignition TDC.

 The marking 0° CKA on the belt pulley (4) must point vertically downward.

3

Pull out retaining pin (2.1) at  assembly tool (2).

4

Set engine at crankshaft using  counterholder to 30° crank angle after ignition TDC.

 The marking 30° CKA on the belt pulley (4) must point vertically downward.

5

Push both halves of the  assembly tool (2) onto the milled surfaces of the balance shafts (1).

6

Turn engine at crankshaft using  counterholder against direction of engine rotation and set to ignition TDC and in this connection combine both halves of  assembly tool (2) and secure with retaining pin (2.1).

 The marking 0° CKA on the belt pulley (4) must point vertically downward.

7

Mark camshaft bearing caps (10).

8

Remove bolts (9) and remove camshaft bearing caps (10) from camshafts (7).

9

Attach  hold-down tools (8) to camshafts (7) so that free of tension and tighten.