1 | Roller-type cam follower |
2 | Compensating element |
P05.00-2096-02
| Remove/install | ||
1 | Remove camshafts | ||
The camshaft positioners remain on the camshafts. | |||
2 | Remove roller cam follower (1) and compensating element (2) | When removing several compensating elements (2) make sure that roller-type cam follower (1) with compensating elements (2), which were not replaced, are reinstalled at the previous fitting point. Mark the roller cam follower (1) for the corresponding compensating element (2) if necessary. | |
Installation: Lubricate roller cam follower (1) and compensating element (2). | |||
| Check | ||
3 | Check compensating element (2) for proper function and replace if necessary | | |
The compensating element (2) should not allow itself to be pressed together by the normal force of the hand and also only slowly when using a strong force. | |||
If a number of compensating elements (2) are defective: | |||
| |||
Check compress oil supply of cylinder head. | |||
4 | Install in the reverse order | ||
Danger ! | Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. | Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. | |
5 | Carry out an engine test run, checking the engine for proper operation and leaktightness |
Referenced documents
- ar0520p6992gq Remove/install camshafts
- as0000z000501a Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.