Remove/install retaining lock for crankshaft/ring gear · ar0330p5000olf · Mercedes-Benz WIS

AR03.30-P-5000OLF

Remove/install retaining lock for crankshaft/ring gear

15.11.2019

Engine

651 in model 222

1	Retaining lock

P03.30-2151-01

 Danger	Risk of death when working on component parts and systems with U >= 30 V alternating voltage (AC) or U >= 60 V direct voltage (DC)	Do not touch damaged or defective live component parts and lines or non-insulated electrical connections and lines.	AS00.00-Z-0035-01A
Topical note	Notes on battery		AH54.10-P-0001-01A
Topical note	General information on handling vehicles with high-voltage on-board electrical system and/or lithium-ion battery and/or gaseous-fuel drive system		AH00.00-Z-0300-01A
	Install/remove
1	Remove starter		AR15.30-P-7100OLF
2	Detach coolant line low-temperature circuit from engine charge air duct and place to one side		AR09.41-P-8623OLF
3	Insert retaining lock (1) into starter opening	 If necessary rotate engine at belt pulley/vibration damper in direction of engine rotation until the  retaining lock (1) latches in the starter ring gear.
		 Counterholder	*651589074000
		 Retaining lock	*651589024000
4	Removal in the reverse order

651 589 07 40 00

Counterholder

651 589 02 40 00

Retaining lock

ah0000z030001a General information on vehicles with high-voltage on-board electrical system and/or lithium-ion battery and/or gaseous-fuel drive system as well as personal protective equipment
ah5410p000101a Notes on battery
ah5410p000101a
ar0941p8623olf Remove/install engine charge air duct upstream of charge air cooler
ar1530p7100olf Remove/install starter
as0000z003501a Risk of death when working on component parts and systems with U >= 30 V alternating voltage (AC) or U >= 60 V direct voltage (DC)