AR01.20-B-5014C | Remove/install cylinder head cover | 12.02.16 |
Cumbustion engine 372, 374, 376, 377 with Vehicle 382, 384, 386, 682, 688, 693, 694, 695
B01.20-0002-12
1 Cylinder head cover
2 Direct vent
3 Cover fastening bolts
4 Cylinder head retightening compound
5 Vent hose
6 Cover gasket
| Remove and install | ||
Danger! | Risk of personal and material damage when tilting and returning the engine hood. | Make sure that the tilting and tilt-back area is free of objects and people. Tilt hood and lock it with safety rod. Tilt back the hood cover to its correct service position lock-in. | |
1.1 | Tilt the engine hood. | Trucks with semi forward cabin | |
Danger! | Risk of personal and material damage when tilting and returning the vehicle cab. | Make sure that the tilting and tilt-back area is free of objects and people. Tilt the cabin until the safety rod locks it in its final position. Tilt back the cabin to its correct service position lock-in. | |
1.2 | Tilt the cab. | Trucks with semi-advanced cab. | |
1.3 | Open engine compartment cover | Bus. | |
2 | Clean the engine top part | ||
3 | Disconnect the hose (5) from the direct vent | ||
4 | Remove the bolts (3) with the plain washers | Installing: Tighten the bolts equally and alternately. | |
| |||
5 | Remove the cover (1) and the gasket (6). | Installing: Apply a new gasket, making sure the contact surface is clean. | |
6 | Install in reverse order |
Crankcase ventilation, cylinder head cover
Referenced documents
- ar6080b0010a Tilt cab to repair position, tilt back
- ar8840b1000a Opening engine hood, moving to upright position and closing
- as6080b000101a Risk of injury caused by body parts being pinched or crushed as cab is tilted
- as8840b000101a Risk of injury caused by pinching and crushing when opening and closing engine hood