P01.40-2167-09
Shown on model 219.375 |
05 | Cylinder illumination unit | R4 | Spark plugs |
| Remove/install | ||
Danger | Risk of death when working on component parts and systems with U >= 30 V alternating voltage (AC) or U >= 60 V direct voltage (DC) | Do not touch damaged or defective live component parts and lines or non-insulated electrical connections and lines. | |
Danger | Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer. | |
Warning | Risk of injury. Skin or eye injuries may result when handling hot or glowing objects. | Wear protective gloves, protective clothing and safety glasses, if necessary. | |
1 | Remove spark plugs (R4) | ||
| MODEL 219.375 | ||
| MODEL 219.376 | ||
One spark plug for each cylinder. | |||
2 | Move piston of cylinder to be checked to bottom dead center (BDC) | To do this, crank engine at center bolt of crankshaft in the direction of engine rotation: | |
| |||
Firing order | |||
3 | Connect cylinder illumination unit (05) and guide flexible endoscope from cylinder illumination unit (05) through spark plug bore into the respective cylinder | ||
| Check | ||
4 | Check cylinder barrel | ||
General information on inspecting cylinder walls | |||
If the condition of cylinder barrel is not clearly recognizable, cylinder head must be removed. Before removal, always observe the general information on testing cylinder barrels: | |||
5 | Conduct checking of other cylinders in the same way | ||
6 | Install in the reverse order |
Referenced documents
- ah0100p030001va General information on inspecting cylinder walls
- ap1510p1580ty Replace spark plugs
- ap1510p1580tz Replace spark plugs
- ar0100p130003ha Firing order
- as0000z000201a Risk of injury. Skin or eye injuries may result when handling hot or glowing objects.
- as0000z001001a Risk of death caused by vehicle slipping or toppling off of the lifting platform.
- as0000z003501a Risk of death when working on component parts and systems with U >= 30 V alternating voltage (AC) or U >= 60 V direct voltage (DC)