AP35.20-A-3550A | Rear axle wheel hubs - regreasing, checking tapered roller bearings | 10.1.08 |
REAR AXLE 745.800 in MODEL NAB372.124 /317
Modification notes
10.12.04 | Multipurpose grease, filling capacity per wheel hub | Rear axle 745.800 | |
17.12.04 | Filling capacity of rear wheel hub revised | Step 8 |
| Removing | ||
1 | Remove rear road wheels. | The vehicle must be jacked up on the lift support points when detaching the rear wheels. | |
| Remove/install wheels | ||
2 | Remove brake drum | ||
| Remove/install brake drum | ||
3 | Remove rear axle shaft | ||
| Remove/install rear axle shaft | ||
4 | Remove rear wheel hub | ||
| Remove/install rear wheel hub | ||
5 | Disassemble rear wheel hub | ||
| Disassemble/assemble rear wheel hub | ||
6 | Clean rear wheel hub and all tapered roller bearings | ||
| Checking | ||
7 | Check all tapered roller bearings for condition and wear | Worn tapered roller bearings should be replaced in pairs. | |
| Install | ||
8 | Grease all tapered roller bearings | | |
MB multipurpose grease | |||
9 | Assemble rear wheel hub | ||
| Disassemble/assemble rear wheel hub | ||
10 | Install rear wheel hub | ||
| Remove/install rear wheel hub | ||
11 | Adjust wheel bearing play | ||
| Adjust wheel bearing play | ||
12 | Install rear axle shaft | ||
| Remove/install rear axle shaft | ||
13 | Install brake drum | ||
| Remove/install brake drum | ||
14 | Fit rear wheels | ||
| Remove/install wheels |
Wheel hub, cap
Number | Designation | Rear axle 745.800 | ||
BF35.20-N-1001-01B | Multipurpose grease | Capacity per wheel hub | g | 200 |
Specifications for Operating Fluids | Sheet | |||
Repair materials
Number | Designation | Order number |
BR00.45-Z-1017-06A | MB multipurpose grease | A 001 989 34 51 11 |
Referenced documents
- ar3520a0300a Adjust wheel bearing play
- ar3520a0310a Remove/install rear wheel hub
- ar3520a0320a Disassemble/assemble rear wheel hub
- ar3530a0620a Remove/install rear axle shaft
- ar4010a1100a Remove/install wheels
- ar4210a1010a Remove/install brake drum