MODEL | 415 with ENGINE 200, 607 |
For this, the lower engine compartment paneling must be removed as there is no drain screw on the cooler.
Table for calculating refill quantity of anticorrosion and antifreeze agent |
A | Anti-corrosion agent concentration and antifreeze concentration in vol.% |
B | Total coolant capacity in liters |
C | Refill quantity of anti-corrosion agent and antifreeze in liters |
N20.00-0377-04
Example of calculation:
Measured antifreeze -20 °C = 32 vol.%
Anti-corrosion agent concentration and antifreeze concentration in vol.% (A)
Total coolant capacity in liters (B) = 8.5 l
Required refill quantity of anticorrosion and antifreeze agent in liters (C) = 2.25 l
1 | Enter the anticorrosion and antifreeze concentration in vol.% (A) in the calculation table. |
2 | Enter total coolant filling quantity in liters (B) in the calculation table. |
3 | Determine required refill quantity of anticorrosion and antifreeze agent in liters (C). |
N20.00-2001-04
4 | Remove coolant hose (1). |
There is no drain screw on the cooler. |
5 | Drain the coolant in the calculated refill quantity of anticorrosion and antifreeze agent in liters (C). |
6 | Attach coolant hose (1). |
Check for correct seating. |
7 | Fill in the calculated refill quantity of anticorrosion and antifreeze agent in liters (C) into the cooling system. |
8 | Start engine and run for about 1 minute at varying revs. |
S20.00-4525-11