ap2000p2052c

Check engine compartment air flap

Type ap · topic 20.00 · version 0101 · 2019-01-25

Applies to: Engine 176 in model 463 up to model year 2019

Where it sits

Function group 1 Engine › 20 Engine cooling system › 20.00 General — Series 176 · Series 463

EinPAS 15 Engine › 15.30 Air intake/charging › 15.30.31 Actuator motor/actuator/cylinder — Series 176 · Series 463

AP20.00-P-2052C

Check engine compartment air flap

21.01.2019

Engine

176 in model 463

up to model year 2019

Check engine compartment air flap

Shown on engine 176 in model 463.234

1

Engine hood paneling

2

Engine hood air duct segment

3

Air flap housing

P20.00-2582-06

Check engine compartment air flap

P20.00-2583-08

Shown on engine 176 in model 463.234

4

Air flap

5

Seal

Check engine compartment air flap

P20.00-2592-08

Shown on engine 176 in model 463.234

6

Seal contact surface

7

Air duct segment

Warning

Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.

No parts of the body or limbs should be within the operating area when the components are moving.

AS00.00-Z-0011-01A

Clean

1

Clean area around air flap housing (3).

2

Clean area surrounding engine hood air duct segment (2).

3

Clean seal contact surface (6) and air duct segment (7).

Check

4

Check engine hood paneling (1) for damage, correct seating and mounting.


The engine hood paneling (1) must not be deformed, damaged or be incorrectly installed.
The engine compartment can otherwise be damaged.

If problems occur,

rectify the problems.

Subject to separate repair order.

5

Check engine hood air duct segment (2) for damage, correct seating and mounting.


The engine hood air duct segment (2) must not be deformed, damaged or incorrectly installed.
The engine compartment can otherwise be damaged.

If problems occur,

rectify the problems.

Subject to separate repair order.

6

Check air flap housing (3) for damage, correct seating and mounting.

If problems occur,

rectify the problems.

Subject to separate repair order.

7

Check seal (5) for damage, correct seating and mounting.

If problems occur,

rectify the problems.

Subject to separate repair order.

8

Check air flap (4) for damage, correct seating and mounting.

If problems occur,

rectify the problems.

Subject to separate repair order.

9

Check air duct segment (7) for damage.

If problems occur,

rectify the problems.

Subject to separate repair order.

Referenced documents