ap2000p2011g

Engine cooling system - checking and correcting fluid level

Type ap · topic 20.00 · version 0106 · 1998-06-08

Applies to: ENGINE 102, 103, 104, 110, 112, 113, 115, 117, 602, 603, 606, 616, 617

Where it sits

Function group 1 Engine › 20 Engine cooling system › 20.00 General — Series 117 · Series 602 · Series 616 · Series 617

EinPAS 15 Engine › 15.25 Engine cooling system › 15.25.5 Coolant circuit, complete — Series 117 · Series 602 · Series 616 · Series 617

Also applies to engines/gearboxes: 102 ***, 103 ***, 104 ***, 110 ***, 112 ***, 113 ***, 115 ***, 603 ***, 606 ***

AP20.00-P-2011G

Engine cooling system - checking and correcting fluid level

18.7.96

ENGINE 102, 103, 104, 110, 112, 113, 115, 117, 602, 603, 606, 616, 617

Engine cooling system - checking and correcting fluid level
Engine cooling system - checking and correcting fluid level

P20.00-0272-01

P20.00-0229-01

Engine cooling system - checking and correcting fluid level
Engine cooling system - checking and correcting fluid level

P20.00-0393-01

P20.00-0304-01

Checking

Danger!

Risk of injury to skin and eyes from scalding from hot coolant which splashes out. Risk of poisoning from swallowing coolant.

Do not open the cooling system unless the coolant temperature is below 90 °C. Open cap slowly and allow the pressure to release. Do not pour coolant into containers for drinks.

Wear protective gloves, protective clothes, and eye protection.

AS20.00-Z-0001-01A

1

Remove cap

2

Check coolant level

The cooling system is properly filled when the coolant reaches up to the mark in the filler fitting or the mark on the coolant expansion reservoir.

Referenced documents