P06.40-2043-09
1 | Hydrogen sensor 1 on fuel tank over rear axle |
P06.40-2045-09
2 | Hydrogen sensor 2 over fuel cell stack |
P06.40-2044-09
3 | Hydrogen sensor 3 in fuel cell exhaust air pipe |
Danger | Risk of explosion when using a forming gas with incorrect mixing ratio. Risk of suffocation due to inhalation of forming gas. Risk of injury due to bursting of high-pressure hoses. | Wear safety glasses and protective gloves. No smoking or open flames. Work in well-ventilated rooms only. | |
Danger | Risk of death when working on component parts and systems with U >= 30 V alternating voltage (AC) or U >= 60 V direct voltage (DC) | Do not touch damaged or defective live component parts and lines or non-insulated electrical connections and lines. | |
Danger | Risk of explosion caused by escaping hydrogen or overheating of the fuel tanks when working on the hydrogen system. Risk of frostbite to body parts caused by escaping gas and by touching component parts carrying gas when emptying fuel tanks. Risk of asphyxiation caused by inhalation of air diluted by hydrogen. Risk of burn injuries by coming into contact with an invisible pale blue hydrogen flame. | ||
Topical note | Notes on fuel cell system | ||
Topical note | General information on handling vehicles with high-voltage on-board electrical system and/or lithium-ion battery and/or gaseous-fuel drive system | ||
| Check | ||
1 | Check hydrogen sensor 2 over fuel cell stack (2) for soiling and proper operation. | ||
2 | Check hydrogen sensor 1 on fuel tank over rear axle (1) for soiling and proper operation. | ||
3 | Check hydrogen sensor 3 in fuel cell exhaust air pipe (3) for soiling and proper operation. | ||
4 | Calibrate hydrogen sensor 3 in fuel cell exhaust air pipe (3). |
Referenced documents
- ah0000p002201rfw Notes on fuel cell system
- ah0000z030001a General information on vehicles with high-voltage on-board electrical system and/or lithium-ion battery and/or gaseous-fuel drive system as well as personal protective equipment
- ap0640p0650fc Check hydrogen sensors of tank system for proper operation and soiling
- ap0640p0651fc Check hydrogen sensor in fuel cell exhaust air pipe for soiling and proper operation
- ap0640p0652fc Check hydrogen sensor over fuel cell stack for soiling and proper operation
- ap0640p0655a Calibrate hydrogen sensor in fuel cell exhaust air pipe
- as0000z003001b Risk of explosion caused by escaping hydrogen or overheating of the fuel tanks when working on the hydrogen system. Risk of frostbite to body parts caused by escaping gas and by touching component parts carrying gas when emptying fuel
- as0000z003501a Risk of death when working on component parts and systems with U >= 30 V alternating voltage (AC) or U >= 60 V direct voltage (DC)
- as8300z000102a Risk of explosion when using a forming gas with incorrect mixing ratio. Risk of suffocation due to inhalation of forming gas. Risk of injury due to bursting of high-pressure hoses.