P00.20-2894-08
Shown on model 213.004 |
1 | Center front engine compartment paneling | 3 | Rear engine compartment paneling | |
2 | Center engine compartment paneling |
Warning | Risk of injury. Skin or eye injuries may result when handling hot or glowing objects. | Wear protective gloves, protective clothing and safety glasses, if necessary. | |
Danger | Risk of death when working on component parts and systems with U >= 30 V alternating voltage (AC) or U >= 60 V direct voltage (DC) | Do not touch damaged or defective live component parts and lines or non-insulated electrical connections and lines. | |
Topical note | General information on vehicles with high-voltage on-board electrical system and/or lithium-ion battery and/or gaseous-fuel drive system as well as personal protective equipment | ||
Topical note | Notes on battery | ||
Notes on evaluating leakages | |||
| Remove | ||
1 | Remove front center engine compartment lining (1), center engine compartment lining (2) and rear engine compartment lining (3). | ||
| Model 213, 238 | ||
| Model 257 | ||
| Model 290 | ||
| Check | ||
2 | Check visible systems, component parts, lines and hoses of the drive train on the underfloor for damage, correct routing, fluid loss, correct mounting and corrosion. | If necessary, use commercially available devices/tools. | |
Brake system, | |||
If problems are determined, | |||
| |||
rectify the problems. | |||
After obtaining special order. | |||
3 | Check visible systems, component parts, lines and hoses on the underfloor for damage, correct routing, fluid loss, correct mounting and corrosion. | Equipment-dependent. | |
If necessary, use commercially available devices/tools. | |||
External noise sound generator, | |||
If problems are determined, | |||
| |||
rectify the problems. | |||
After obtaining special order. | |||
4 | Check underfloor and visible component parts on underfloor for damage, routing, mounting and corrosion. | If necessary, use commercially available devices/tools. | |
Wheel well trim | |||
If problems are determined, | |||
| |||
rectify the problems. | |||
After obtaining special order. | |||
5 | Check visible body panels for corrosion and deformation. | If necessary, use commercially available devices/tools. | |
Wheel well body panels | |||
If problems are determined, | |||
| |||
proceed in accordance with the country-specific regulations for mobility and body shell complaints. | |||
After obtaining special order. | |||
6 | Check underfloor paneling for damage from driving over obstacles or from bottoming damage. | If necessary, use commercially available devices/tools. | |
If it is suspected that there is damage from driving over obstacles or bottoming, | |||
| |||
check steering for mechanical damages. | |||
If the steering is mechanically damaged, | |||
| |||
Replace steering for safety reasons. | |||
After obtaining special order. | |||
| Install | ||
7 | Install front center engine compartment lining (1), center engine compartment lining (2) and rear engine compartment lining (3). | ||
| Model 213, 238 | ||
| Model 257 | ||
| Model 290 |
Referenced documents
- ah0000n001101a Notes on evaluating leakages
- ah0000z030001a General information on vehicles with high-voltage on-board electrical system and/or lithium-ion battery and/or gaseous-fuel drive system as well as personal protective equipment
- ah5410p000101a Notes on battery
- ah5410p000101a
- ar6120p1105fr Remove/install lower engine compartment lining
- ar6120p1105frx Remove/install lower engine compartment lining
- ar6120p1105lwe Remove/install lower engine compartment lining
- as0000z000201a Risk of injury. Skin or eye injuries may result when handling hot or glowing objects.
- as0000z003501a Risk of death when working on component parts and systems with U >= 30 V alternating voltage (AC) or U >= 60 V direct voltage (DC)