AP00.20-B-0010F | Inspection | 12.02.16 |
Vehicle 384 with Cumbustion engine 376.906, 376.907, 376.945, 376.950, 376.955, 376.962
Vehicle 386 with Cumbustion engine 376.907, 376.945, 376.955, 376.986, 376.946, 376.958
Vehicle 682 with Cumbustion engine 376.930, 376.956, 376.947
B00.20-0115-06
Medium size truck
Inspection between 20 and 100 hours
(between 1,000 and 5,000 Km)
B00.20-0116-06
Semi-heavy truck
Customer: | Job Order Nr: | ||
Date: | Confirm the jobs to be carried out with the Customer: | ||
Mechanic: | |||
Services performedMark with an “x” | Vehicle condition upon entering the workshop (if the item is not in order, mark with an "x"). | ||
◻ | Control to be executed by the Technical Consultant | ||
◻ | Fire extinguisher: check fixture, sealing, pressure, and expiration date of the load and the case | ||
◻ | Seat belts: check for condition and operation | ||
Oil change services | |||
Oil change | |||
Observe the intervals indicated in the Oil change interval table. If it is not necessary to change the oil and filter, check oil level. | |||
◻ | Front axle | ||
◻ | Rear axle | ||
Check level and correct as necessary | |||
◻ | Windshield washer | ||
Lubrication | |||
◻ | Lubricate using grease under pressure: King-pins Front and rear brake shoe actuation shafts (drum brake) Universal joints of the transmission shafts Mounting and shaft for the fan belt tensioning pulley | ||
Vehicles with centralized lubrication adapted by third parties | |||
◻ | Transmission shaft: Lubricate sliding sleeve and cross fitting | ||
◻ | Check if the lubrication points are being lubricated | ||
◻ | Centralized lubrication (equipment adapted by third parties): Check lubrication cycle; adjust as necessary | ||
Maintenance works | |||
Check for leaks and conditions | |||
◻ | Inlet tube between air cleaner and engine | ||
Engine: | |||
◻ | Valves: Adjust with cold engine or at least 30 minutes after engine shut-off | ||
◻ | Fuel pre-filter: Clean the filtering element | ||
◻ | V-belts (fan drive): Check for conditions. If necessary, adjust belt tension | ||
◻ | Oil pan: Retighten the attachment screws observing the torques | ||
◻ | Engine front cushions: Adjust | ||
Chassis and body | |||
◻ | Electric installation: Starter, alternator, batteries and ground connections, check if the cables present friction points and if there are loose terminals; re-tighten | ||
◻ | 5th wheel: Check the attachment | ||
◻ | Towing coupling: Calibrate including the spare tire wheel, Check for fixture | ||
◻ | Tire pressure: Check tire inflation pressure, including the spare wheel | ||
Check if the bolts and nuts are tightened. Retighten, if necessary | |||
◻ | Engine: Exhaust manifold and flange and oil and fuel pipelines | ||
◻ | Chassis and body: Engine and automatic transmission suspension Drive shaft universal joints Steering box attachment Arms and steering bars attachment Brake system cylinders and valves attachment Tensioning bars support fixture Pneumatic reservoir attachment | ||
Retighten the nuts and bolts observing the tightening moments | |||
◻ | Leaf springs “U” clamps.Air suspension support attachment | ||
◻ | Wheels: Retighten the fixing nuts | ||
◻ | Pitman arm | ||
◻ | Final control | ||
Routing test or test in rolls: Pay attention to vehicle safety for the operation of brakes, steering, lighting, warning lights and general performance |