AP00.20-B-0010E | Inspection | 12.02.16 |
Vehicle 386 with Cumbustion engine 475.951, 475.950, 475.982, 475.954
Vehicle 388 with Cumbustion engine 476.979, 476.980, 476.982, 476.983
B00.20-0088-11
Heavy and extra heavy trucks
Customer: | Job Order Nr: | ||
Date: | Confirm the jobs to be carried out with the Customer: | ||
Mechanic: | |||
Services performedMark with an “x” | Vehicle condition upon entering the workshop (if the item is not in order, mark with an "x"). | ||
◻ | Control to be executed by the Technical Consultant | ||
◻ | Fire extinguisher: check fixture, sealing, pressure, and expiration date of the load and the case | ||
◻ | Seat belts: check for condition and operation | ||
Lubrication services | |||
Oil change | |||
◻ | Rear axle: Change the oil | ||
Check level and correct as necessary | |||
◻ | Windshield washer | ||
◻ | Air conditioning | ||
Lubrication | |||
◻ | Lubricate using grease under pressure: King-pins Front and rear brake shoe actuation shafts (drum brake) Universal joints of the transmission shafts Mounting and shaft for the fan belt tensioning pulley | ||
Vehicles with centralized lubrication adapted by third parties | |||
Transmission shaft: Lubricate sliding sleeve and cross fitting | |||
Check if the lubrication points are being lubricated | |||
Maintenance works | |||
Check for leaks and conditions | |||
◻ | Inlet tube between air cleaner and engine | ||
Engine | |||
◻ | Valves: Adjust with cold engine or at least 30 minutes after engine shut-off | ||
◻ | Fuel pre-filter: Clean the filtering element | ||
◻ | V-belts: Check the condition and adjust the tension if necessary | ||
◻ | Engine front cushions: Adjust | ||
Chassis and body | |||
◻ | Electric installation: Check fixture of electrical cables in the terminals of the starter motor, alternator, batteries and connections to ground. Check if the electric wires do not have friction points on components or on the vehicle structure. | ||
◻ | 5th wheel: Check the attachment | ||
◻ | Towing coupling: Calibrate including the spare tire wheel | ||
◻ | Tire pressure: calibrate the tires, including spare wheel. | ||
◻ | Centralized lubrication (equipment adapted by third parties): Check lubrication cycle; adjust as necessary | ||
Check if the bolts and nuts are tightened. Retighten, if necessary | |||
◻ | Engine: Exhaust manifold and flange and oil and fuel pipelines | ||
◻ | Chassis and body: Engine and automatic transmission suspension. Drive shaft universal joints. Steering box attachment. Arms and steering bars attachment. Brake system cylinders and valves attachment. Tensioning bars support fixture. Pneumatic reservoir attachment | ||
Tighten according to proper torque | |||
◻ | Leaf springs “U” clamps.Air suspension supports attachment. | ||
◻ | Wheels: Retighten the fixing nuts. | ||
◻ | Pitman arm | ||
◻ | Final control | ||
Routing test or test in rolls: Pay attention to vehicle safety regarding the operation of brakes, steering, lighting, control pilot lights and general performance. |