ap0000b0004b

Put vehicle back into operation

Type ap · topic 00.00 · version 0100 · 2020-09-01

Applies to: Model all (TRUCK)

Where it sits

Function group 0 Overall › 00 Overall vehicle › 00.00 General — Series 900 (models 9**) · Series 902 (models 9**) · Series 904 (models 918, 919, 924, 925, 938, 943, 957) · Series 906 (models 917, 918, 924, 953)

EinPAS 10 Service › 10.10 Customer service › 10.10.30 Administration/service/mobility — Series 900 (models 9**) · Series 902 (models 9**) · Series 904 (models 918, 919, 924, 925, 938, 943, 957) · Series 906 (models 917, 918, 924, 953)

Also applies to engines/gearboxes: 139 ***, 254 ***, 256 ***, 272 ***, 276 ***, 282 ***, 457 9**, 541 9**, 542 9**, 608 ***, 700 4**, 700 420, 700 421, 700 422, 700 423, 715 3**, 715 5**, 722 6**, 722 9**, 724 ***, 724 0**, 724 033, 724 044, 724 045, 724 1**, 724 103, 724 114, 724 115, 724 120, 725 ***, 725 0**, 725 035, 725 037, 725 038, 725 085, 725 1**, 739 390, 739 391, 739 395, 739 396, 739 397, 739 398, 739 399, 740 698, 743 3**, 743 4**, 743 498, 746 971, 924 9**, 924 910, 925 9**, 926 9**

AP00.00-B-0004B

Put vehicle back into operation

25.08.2020

Model

all (TRUCK)

1

Check for any difficulties when actuating engine start


If difficulty in starting the engine is identified, do not insist on starting the engine.
Otherwise, starting the engine with the battery at low voltage and insisting on starting it can cause irreparable damage to the components of the vehicle's electronic management system (modules) in addition to damage to the starter.

2

Remove all plastic covers

Remove all air intake system protections, major assemblies and exhaust vents previously installed during vehicle standstill.

3

Check the brake discs and parking brake


 

AP42.20-B-4350D

AP42.20-B-4350A

Ensure perfect cleaning of brake components, especially cleaning rusted parts such as discs and brake linings.

Remove the degreasing agent applied during standstill.

4

Clean plastic parts

Clean the instrument cluster, steering wheel, and other plastic parts only with a soft, preferably dry cloth, if necessary moisten it with water.

Do not use any other cleaners or solvents as they may damage the paint on the panel coating, steering wheel, etc.

5

Replace the engine oil


 

AP18.00-B-0101L

AP18.00-B-0101J

AP18.00-B-0101I

AP18.00-B-0101F

AP18.00-B-0101A

AP18.00-B-0101M

AP18.00-B-0101ONR

AP18.00-B-0101SFT

AP18.00-B-0101TB

AP18.00-B-0101TGA

AP18.00-B-0101B

Before the commissioning of the vehicle:

Replace the engine conservation oil previously applied during vehicle standstill.

6

Reinstall the service belts and observe the conservation condition of the pulleys


 

AP13.20-B-1350B

AP13.20-B-1350A

AP13.20-B-1350C

Tension the V-belts of the engine.

If the grooves of the pulleys oxidize or the belts dry out:

Clean the pulleys and replace the dry belts.

7

Test the battery condition

AR54.10-B-1129A

Reconnect the ground line of the battery (in vehicles with general key switch on the key) and perform the tests.

If the battery is empty:

Reload it.


AR54.10-B-1130A

8

Check hydraulic steering for leaks and contamination

If leakage or contaminated hydraulic fluid is present:

Replace.


AR46.25-B-3300C


AR46.25-B-3300XA

9

Check the additive A550 in the fuel

The additive A550 in the fuel must be within 6 months.

Check fuel reservoir impurities through the filter and, if necessary:

Replace the fuel filter, the pre-filter filtering element, and bleed the system.

10

Drain and fill up the tank of ARLA 32

11

Check the condition of the seal covers


 

AP46.00-B-4653B

Check the condition of the seal covers (of the axle connecting rods, axle steering bars and suspension rods).

12

Check the mechanism and steering terminals clearance.

13

Check the coolant level

Inspect the anti-corrosion/antifreeze concentration if it is below the specified:

Replenish it.


 

AP20.00-B-2010TC


 

AP20.00-B-2010TA


 

AP20.00-B-2010G


 

AP20.00-B-2010F


 

AP20.00-B-2010C


 

AP20.00-B-2010E


 

AP20.00-B-2010B

14

Check for impurities build-up in the air filter


 

AP09.10-B-0951H

AP09.10-B-0980TGA

AP09.10-B-0980N

15

Check air dryer APU valve

If the air dryer cartridge is out of specification:

Replace.


 

AP42.60-B-4381TG


 

AP42.60-B-4381C

16

Check the general condition of the tires

Check the general condition of the tires and wheels for possible damages, deformation, dryness, oxidation, filling valves (including the tire of the spare wheel) as well as the expiration date of the tires.

Carry out the tire calibration with the recommended pressure in the tables in the Vehicle Operation Manual.

If it is out of specification, or if it is malfunctioning:

Make the necessary repair.

17

Check the operation of the clutch and check the fluid level of the clutch


 

AP25.20-B-2981TG

AP25.20-B-2981TC

AP25.20-B-2981E

AP25.20-B-2981B

18

Check the transmission oil level

19

Check operation and lubricate the air conditioning system


Check that the air conditioning lubricating oil system is circulating.
Failure to do so may result in damage to the compressor or other components.

Run the engine at idle and turn on the air conditioning system (if available) at minimum speed and temperature for a period of 10 minutes.

For details, refer to the air conditioner manufacturer's manual.

Referenced documents