ad8057d6000a

Drive authorization system shut-off valve (DSV) test of electrical system

Type ad · topic 80.57 · version 0101 · 2003-06-13

Applies to: MODEL 901, 902, 903, 904 with ENGINE 601.943 with CODE (FZ7) Immobilizer

Where it sits

Function group 3 Body › 80 Central locking system, convenience operation, drive authorization systems › 80.57 Drive authorization system (DAS) — Series 601 (models 943) · Series 901 · Series 902 · Series 903 · Series 904

AD80.57-D-6000A

Drive authorization system shut-off valve (DSV) test of electrical system

10.6.97

MODEL 901, 902, 903, 904 with ENGINE 601.943 with CODE (FZ7) Immobilizer

Drive authorization system shut-off valve (DSV) diagnosis previous knowledge

AD80.57-D-2000A

Only disconnect control module connectors with the ignition switched off.

The cables, connectors and plug-in connections are taken into consideration during testing using the HHT, and may need to be separately re-tested for breaks, good contact and correct connection as per the relevant circuit diagram is a fault is indicated.

I

Battery voltage > 9.5 volts

II

Drive authorization system shut-off valve (DSV) (all connectors connected)

III

HHT connected to diagnosis connector

IV

DSV engine control module and RCL control module correctly identified

Testing

1

Drive authorization system shut-off valve (DSV) testing of electrical system, CAN cables

AD80.57-D-6000-01A

2

Drive authorization system shut-off valve (DSV) testing of electrical system, control module

AD80.57-D-6000-02A

3

Drive authorization system shut-off valve (DSV) testing of electrical system, shut-off valve

AD80.57-D-6000-03A

4

Drive authorization system shut-off valve (DSV) testing of electrical system, starting without drive authorization signal

AD80.57-D-6000-04A

5

Drive authorization system shut-off valve (DSV) testing of electrical system, drive authorization signal

AD80.57-D-6000-05A

Referenced documents