1 | Electrical connectors |
2 | Screw |
3 | Bracket |
N3/36 | CDI control unit |
S07.08-4513-06
Topical note | Information on preventing damage to electronic components due to electrostatic discharge | ||
Notes on programming control units | |||
| Remove | ||
1 | Connect diagnostic system and begin commissioning of the CDI control unit (N3/36). | Only when replacing the CDI control unit (N3/36). | |
| Connect STAR DIAGNOSIS and read out fault memory | ||
2 | Remove air filter housing. | ||
3 | Release and disconnect the electrical connections (1). | ||
4 | Remove screws (2). | ||
5 | Remove CDI control unit (N3/36). | To do this pull out CDI control unit (N3/36) to the front from retaining frame (3). | |
6 | Install in the reverse order. | ||
| Install | ||
7 | Install CDI control unit (N3/36) in the bracket (3). | ||
8 | Screw in screw/bolts (2). | Bolt, control unit to bracket | |
9 | Connect electrical connectors (1). | ||
10 | Install air filter housing. | ||
11 | Complete commissioning of the CDI control unit (N3/36). | Only when replacing the CDI control unit (N3/36). | |
12 | Disconnect diagnostic system. | Only when replacing the CDI control unit (N3/36). | |
| Connect STAR DIAGNOSIS and read out fault memory | ||
| Check | ||
Warning | Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. | Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. | |
13 | Perform engine test run. |
Έγγραφα που αναφέρονται
- ad0000s200004e Σύνδεση Star Diagnosis, ανάγνωση μνήμης βλαβών
- ah5400p000101a Οδηγίες για την αποφυγή ζημιών σε ηλεκτρονικά εξαρτήματα λόγω ηλεκτροστατικής εκκένωσης
- ah5421p000103z Οδηγίες για τον προγραμματισμό εγκεφάλων
- ar0910s1150ef
- as0000z000501a Κίνδυνος ατυχήματος λόγω αυτόματης εκκίνησης κατά τη λειτουργία του κινητήρα. Κίνδυνος τραυματισμού με μώλωπες και εγκαύματα σε �