Remove/install hydraulic pump · ar2645b0002tb · Mercedes-Benz WIS

AR26.45-B-0002TB

Remove/install hydraulic pump

12.02.16

Manual transmission 715.372, 715.504, 715.517, 715.527, 715.531, 715.567, 715.568, 715.576

W26.45-1176-11

1 Power take-off 1

2 Sealing gasket

3 Hydraulic pump 1

4 Hydraulic pump 2

5 Power take-off 2

6 Sealing gasket

	Remove and install
 Danger!	Risk of injury on skin and eyes from jets of high pressure hydraulic fluid. Risk of poisoning by ingestion of hydraulic fluid	Before starting a job in a hydraulic system, relieve the pressure in the system. Use protection clothes and goggles.	AS00.00-B-0013-01A
1	Remove the hydraulic pipes at the pump 1 (3) and at the pump 2 (4)	Catch the hydraulic oil in an appropriate container.
2	Remove the hydraulic pump 2 (4) and the PTO 2 (5) from the PTO 1 (1)	 Catch the oil run-off in an adequate container.
		Installing: Clean the sealing surfaces and replace the sealing gaskets (6).
			*BA26.45-B-1011-01G
3	Remove the hydraulic pump 1 (3) from the power take-off 1 (1)	Catch the hydraulic oil in an appropriate container.
		Installing: Clean the sealing surfaces and replace the sealing gasket (2).
			*BA26.45-B-1011-01G
4	Install in reverser order
5	Complete the hydraulic oil level in the power take-off reservoir	 Follow the maker's instructions for service and maintenance.
6	Check the gearbox oil level and correct if necessary	Gearboxes 715.372/504/517/527/531/567/568/576	AP26.00-B-2601A

PTO