si5410b0041a

Service Information: Battery replacement during term of warranty

Type si · emne 54.10 · version 0101 · 2020-08-27

Gælder for: Model 368 Model 382 Model 384 Model 386 Model 634 Model 688 Model 693 Model 694 Model 695 Model 696 Model 934 Model 938 Model 958, 979

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 2 Chassis › 54 El-system, udrustning og instrumenter › 54.10 Batteri, spændingsforsyning, spændingstransformer — Serie 368 · Serie 382 · Serie 384 · Serie 386 · Serie 634 · Serie 688 · Serie 693 · Serie 694 · Serie 695 · Serie 696 · Serie 934 · Serie 938 · Serie 958 · Serie 979

EinPAS 25 bilens ledningsnet/netværk/multifunktion › 25.20 Køretøjets ledningsnet › 25.20.20 Batteri — Serie 368 · Serie 382 · Serie 384 · Serie 386 · Serie 634 · Serie 688 · Serie 693 · Serie 694 · Serie 695 · Serie 696 · Serie 934 · Serie 938 · Serie 958 · Serie 979

EinPAS 45 Data/information › 45.20 Oplysninger/arbejde › 45.20.20 Serviceinformation — Serie 368 · Serie 382 · Serie 384 · Serie 386 · Serie 634 · Serie 688 · Serie 693 · Serie 694 · Serie 695 · Serie 696 · Serie 934 · Serie 938 · Serie 958 · Serie 979

SI54.10-B-0041A

Service Information: Battery replacement during term of warranty

21.08.2020

Model

368

Model

382

Model

384

Model

386

Model

634

Model

688

Model

693

Model

694

Model

695

Model

696

Model

934

Model

938

Model

958, 979

Modification notes

12.08.2020

The document SI54.10-B-0017Aon how to proceed with recharging the batteries was indicated.

Indication of the battery recharge procedure.

Vehicles inoperative for long period - important considerations

If the vehicle remains inoperative for a long period (without engine operation), disconnect the battery negative lead;

If the vehicle remains immobilized for more than 30 (thirty) days, it will be necessary to recharge the batteries according to the procedure indicated in SI54.10-B-0017A.

Should it be necessary to move the vehicle, provided the batteries are charged, connect the battery negative lead checking the terminal screw tightening torque which must be 12 Nm +/- 1 Nm;

For vehicles with Proconve P7 motorization (Euro 5) BlueTec 5, before disconnecting the battery ground cable it is necessary to wait 5 (five) minutes after engine shutdown to ensure that the cleaning process of the AdBlue line is carried out. This process is fundamental to avoid the crystallization of the urea contained in the AdBlue, thus avoiding damages in the exhaust gas aftertreatment system.

When running the vehicle engine, observe if the location is appropriate, i.e., that it has good ventilation.

Analysis of batteries and shipping of batteries under guarantee

Before filing a guarantee claim for batteries, a series of checks is necessary in order to detect eventual discrepancies in the power generating system (alternator), of actuation (starter motor) besides the general vehicle electric wiring system.

Check the procedures for assessing the batteries according to information below, SI54.10-B-0017A.

It is important that the Dealer checks the charge condition of the battery when receiving a new vehicle.

No guarantee claims will be accepted of battery failure caused by long storage periods of the chassis/vehicle at the Dealer, transporter or implementer/body builder.

Service Information bulletin: Battery test and inspection

SI54.10-B-0017A

Henviste dokumenter