ov0001w100128ef

Abbreviations of signal and circuit designations for wiring diagrams

Type ov · emne 00.01 · version 0100 · 2018-12-19

Gælder for: Model 956.264/265

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 0 Samlet › 00 Samlet køretøj › 00.01 Brugerinformation — Serie 956 (modeller 264, 265)

EinPAS 45 Data/information › 45.10 hele bilen › 45.10.1 Grundinformation — Serie 956 (modeller 264, 265)

OV00.01-W-1001-28EF

Abbreviations of signal and circuit designations for wiring diagrams

Model

956.264/265

Abbreviation

Designation

Notes

+12V                        

12 volt power supply

+24V                        

24 volt power supply

5V                          

5 volt voltage supply

15 (12V)                    

Circuit 15, power supply, switched UB (12 volt)

15 (24V)                    

Circuit 15, power supply, switched UB (24 volt)

15R (24V)                   

Circuit 15, power supply, switched (24 volt)

30 (12V)                    

Circuit 30, power supply, battery UB (12 volt)

30 (24V)                    

Circuit 30, power supply, battery UB (24 volt)

30R (24V)                   

Circuit 30, power supply, switched (24 volt)

31a                         

Circuit (terminal). 31, voltage supply, ground

31b                         

Circuit (terminal). 31, voltage supply, ground

49a L                        

Output terminal at left turn signal module

49a R                       

Output terminal at right turn signal module

50

Circuit (terminal) 50, engine start switch

50 (24V)                    

Circuit 50, engine start switch (24 volt)

53

Input terminal at wiper motor (positive)

53a                         

Self-parking plus

53b                         

Terminal at wiper motor shunt winding

54

Terminal for brake lamps

58

Circuit (terminal) 58, light switch

58L                         

Left light switch terminal

58R                         

Right light switch terminal

86

Input terminal at relay or contactor

CAN GND                                    

CAN bus ground

CAN GND 2                   

CAN bus ground 2

CAN H                       

CAN bus High

CAN H OUT                   

CAN bus high output

CAN L                       

CAN bus Low

CAN L OUT                   

CAN bus low output

CAN T                       

Drivetrain CAN

D+                           

Terminal for dynamo plus at alternator

Diag.                     

Diagnosis

Ein/Aus                       

Signal, On/Off

GND                         

Ground

GND_PSM                     

PSM ground

GND_VLA                     

VLA ground

LIN                         

LIN bus

LIN +12V                    

LIN bus power supply (12V)

LIN +24V                    

LIN bus power supply (24V)

LIN GND                     

LIN bus ground

LIN Sig.                     

LIN bus signal

NC                          

Not connected

Sig.                        

Signal

TEMP                        

Temperature signal

TERMH                       

Temperature signal, high

TERML                       

Temperature signal, low

W                           

Circuit W, alternator