gf3030p0001fa

Cruise control (CC), function

Type gf · emne 30.30 · version 0110 · 2008-04-08

Gælder for: ENGINE 112.923 /943, 113.961, 120.983 in MODEL 129 ENGINE 112.942 /970, 113.942 /965 in MODEL 163 ENGINE 111.943 /946 /958 /973 /983, 112.947 in MODEL 170 ENGINE 111.921 /944 /945 as of 1.8.99, 111.952 /956 /974, 111.975 as of 1.8.99, 112.910 /920, 113.944 in MODEL 202 ENGINE 111.951 /955, 112.912 /916 /946 /953 in MODEL 203 up to Model Year 08 /AEJ 07 ENGINE 111.945 /975 #2, 111.945 /975 #0 as of 1.8.99, 111.956 /982, 112.940, 113.943 in MODEL 208 ENGINE 111.957, 112.911 /914 /921 /941, 1

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 1 Motor › 30 Regulering, hastighedsreguleringssystemer › 30.30 Tempomat (TPM), DISTRONIC (DTR), aktiv bremseassistent — Serie 129 · Serie 163 · Serie 170 · Serie 202 · Serie 203 · Serie 208 · Serie 209 · Serie 210 · Serie 211 · Serie 215 · Serie 220 · Serie 230

Gælder også for motorer/gearkasser: 111 921, 111 942, 111 943, 111 944, 111 945, 111 946, 111 947, 111 951, 111 952, 111 955, 111 956, 111 957, 111 958, 111 973, 111 974, 111 975, 111 982, 111 983, 112 910, 112 911, 112 912, 112 913, 112 914, 112 916, 112 917, 112 920, 112 921, 112 922, 112 923, 112 940, 112 941, 112 942, 112 943, 112 944, 112 946, 112 947, 112 949, 112 953, 112 954, 112 955, 112 970, 112 972, 112 973, 112 975, 113 940, 113 941, 113 942, 113 943, 113 944, 113 948, 113 960, 113 961, 113 963, 113 965, 113 966, 113 967, 113 968, 113 969, 113 980, 120 983, 137 970

GF30.30-P-0001FA

Cruise control (CC), function

13.3.08

ENGINE 112.923 /943, 113.961, 120.983 in MODEL 129

ENGINE 112.942 /970, 113.942 /965 in MODEL 163

ENGINE 111.943 /946 /958 /973 /983, 112.947 in MODEL 170

ENGINE 111.921 /944 /945 as of 1.8.99,
111.952 /956 /974,
111.975 as of 1.8.99,
112.910 /920, 113.944
in MODEL 202

ENGINE 111.951 /955, 112.912 /916 /946 /953 in MODEL 203 up to Model Year 08 /AEJ 07

ENGINE 111.945 /975 #2,
111.945 /975 #0 as of 1.8.99,
111.956 /982, 112.940, 113.943
in MODEL 208

ENGINE 111.957, 112.911 /914 /921 /941, 113.940 /980,
111.942 /947 as of 1.8.99
in MODEL 210

ENGINE 112.922 /944 /972 /975, 113.941 /948 /960 /966, 137.970 in MODEL 220

ENGINE 113.960, 137.970 in MODEL 215

ENGINE 112.973, 113.963 in MODEL 230 up to Model Year 08 /AEJ 07

ENGINE 112.913 /917 /949 /954, 113.967 /969 in MODEL 211

ENGINE 112.912 /955, 113.968 in MODEL 209

Cruise control (CC), function

P30.30-2029-06

Shown on engine 111 EURO3/4

B37 Accelerator pedal sensor

F1 Fuse and relay module
(model 163)

K40 Relay module (model 170)

K40/4 Fuse and relay module
(model 202, 208, 210, 230)

K40/7 Fuse and relay module
(model 215, 220)

M16/6 Throttle valve actuator

N3/10 ME-SFI [ME] control unit

N10/1 Front SAM control unit with fuse and relay module (model 203)

N15/3 ETC [EGS] control unit

N47 Traction systems control unit
(vehicle speed signal)

N73 EIS [EZS] control unit

S9/1 Stop lamp switch

S40 CC [TPM] switch

S40/3 Clutch pedal switch

S40/4 CC [TPM] with variable speed limiter switch

CAN Data bus

Task

Maintaining the preselected vehicle speed constant irrespective of the engine load, without operation of the accelerator pedal.

Function

The cruise control function is integrated in the engine control unit. It can be activated from > 40 km/h with the cruise control switch. The engine control unit operates the throttle valve actuator

for the cruise control function with the aid of the input signals and the position of the cruise control switch.

The cruise control mode is switched off by:

Pushing the cruise control pushbutton switch (S40) or Variable cruise control pushbutton switch (S40/4) into the "OFF" position

Operating the service brakes

Moving selector lever into position "N"

Control intervention function of the traction system.

Vehicles with column sleeve module (MRM)

The signals from the pushbutton switch for the cruise control are detected by the steering column module and transmitted to the CAN data bus.

Vehicles with EZS control unit without column sleeve module (MRM)

The signals from the pushbutton switch for the cruise control are detected by the control unit EIS and transmitted to the CAN data bus.

Vehicles without EZS control unit

The signals from the cruise control switch are transmitted directly to the engine control unit.

Vehicles with manual transmission (MT)

Cruise control remains active during gear change, in other words the cruise control is not switched off when the clutch is operated.

Traction systems control unit

Transmits the vehicle speed signal via CAN to the ME control unit.

ME-SFI control unit, location/task/design/function

Other than engine 111 EVO

GF07.61-P-5000F

Engine 111 EVO

GF07.61-P-5000GS

Cruise control pushbutton switch, location/task/design/function

with cruise control or Distronic

GF30.30-P-3100F

Variable cruise control pushbutton switch, location/task/design/function

with cruise control or Distronic

except

GF30.30-P-3101A

Electronic accelerator/cruise control/idle speed control actuator location/task/design/function

GF30.22-P-4010F

Throttle valve actuator, location/task/design/function

Engine 111 EVO

GF30.22-P-4101GS

Stop lamp switch. location/task/function

GF42.10-P-4000A

Clutch pedal switch, location/task/function

With MT

GF29.10-P-2100F

Variable Speed Limiter, function

Additional cruise control, function

except

GF30.30-P-3001A

ETC control unit, location/task

Transmits information about the selector lever position P/N and the driving mode selected via CAN.

Transmission 722.6

GF27.19-P-4012G

Henviste dokumenter