DFI smooth running control function · gf0713p3003c · Mercedes-Benz WIS

GF07.13-P-3003C

DFI smooth running control function

5.7.96

ENGINE 602.982 in MODEL 210.017 /217 /617

P07.13-0328-76

Design

CAN Controller Area Network (CAN databus)

K40 Relay module (up to 02/97)

K40/4 Fuse and relay module (as of 03/97)

L5/6 Crankshaft position sensor

N3/8 DFI [EVE] control module

N15/3 ETC control module

Y23/3 DFI distributor injection pump

Y23/3k1 DFI fuel quantity actuator

Y23/3l1 Slide valve actuator

Task	Reducing irregular engine running produced in the idle speed phase (vibrations).
Operation	The DFI control module (N3/8) determines irregularities in engine speeds in the idling speed range from the signal of the crankshaft position sensor (L5/6). These are rectified by controlling the quantity injected at the specific cylinder. Idle speed in this case remains constant.
Relay module (K40), location/design/task/function	up to 02/97	GF07.13-P-3101H
Fuse and relay module (K40/4) location/task/function	as of 03/97	GF07.13-P-3141H
DFI control module (N3/8), input signals/output signals location/task/design/function		GF07.13-P-3102C
Crankshaft position sensor (L5/6) location/design/task/function		GF07.04-P-4116H
CAN data bus task/design/function		GF54.00-P-0005C
ETC control module, location/task	Transmission 722.6	GF27.19-P-4012G
DFI distributor injection pump (Y23/3) task/design/function		GF07.02-P-5002C
DI quantity control, task/design/function		GF07.13-P-3163AC