Distributor injection pump position / task / design / function

GF07.02-P-5002C

5.7.96

ENGINE 602.982 in MODEL 210.017 /217 /617

Distributor injection pump position / task / design / function

P07.13-0258-76

11/20 Type plate

20 Fuel metering control with control sleeve position sensor

21 High pressure pump with distributor

40 Injection timing device with adjusting valve

13 Fuel pump

Y1/1 Electrohydraulic shutoff actuator

Designation VE5 /11E 2000 R 642

V Distributor injection pump
E Design size
5 No. of cylinders
11  of pump piston in mm
E Electronically controlled
2000 Rated speed
R Direction of rotation
642 Design code

		 In contrast to the inline injection pump, only one pump cylinder and one pump piston is present in the DFI distributor injection pump (Y23/3). The fuel delivered by the pump piston is distributed over a distributor groove in the firing order 1-2-4-5-3 to the injection lines.
	Task	 Producing injection pressure  Controlling injected quantity  Distributing fuel  Controlling start of injection
	Distributor injection pump position/design		GF07.02-P-5010C
	Function:
	DFI distributor injection pump lubrication function		GF07.13-P-3121C
	DFI fuel pump position/task/design/function		GF07.13-P-3120C
	Distributor injection pump high pressure circuit function		GF07.02-P-5015C
	DI quantity control function		GF07.13-P-3163AC
	DFI start of injection control function		GF07.13-P-3159AC
	Electrohydraulic shutoff actuator position/task/design/function		GF07.04-P-3152C

Henviste dokumenter