ar9160p0624mfb

Remove/install restraint systems control unit

Type ar · emne 91.60 · version 0101 · 2019-10-16

Gælder for: Model 247

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 3 Karrosseri › 91 Sæder, køjer, selestrammere › 91.60 Airbag, fodgængerbeskyttelse — Serie 247

EinPAS 27 Passive sikkerhedssystemer › 27.16 Airbag › 27.16.11 Styreenhed/relæ — Serie 247

EinPAS 27 Passive sikkerhedssystemer › 27.17 Sikkerhedssystem › 27.17.11 Styreenhed/relæ — Serie 247

AR91.60-P-0624MFB

Remove/install restraint systems control unit

07.10.2019

Model

247

Remove/install restraint systems control unit

Shown on model 247.0

1

Nuts

2

Electrical connectors

N2/10

Supplemental restraint system control unit

P91.60-A009-05

Warning

Risk of injury during testing and repair operations related to pyrotechnical components

Do not expose pyrotechnical component parts to temperatures above 100 °C or 212 °F. Disconnect current supply when working on such component parts.

AS91.00-Z-0008-01A

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Topical note

Notes on self-locking nuts and bolts

AH00.00-N-0001-01A

Notes on safety-relevant components

AH00.00-Z-0019-01A

Information, assessment and legal requirements when working with, handling and storing pyrotechnical components

AH91.00-Z-0000-10A

Remove/install

1

Switch off ignition and store transmitter key outside of transmission range (min. 2  m).

2

Disconnect ground line from battery.

AR54.10-P-0003MFA

3

Remove trim at bottom for instrument panel on driver's side.

AR68.10-P-1501MFA

4

Remove bottom trim for instrument panel on front passenger side.

AR68.10-P-1502MFA

5

Loosen floor covering in driver and front passenger footwell in working area and place to one side.

6

Unlock powertrain control unit (N127) and place to one side with connected lines.


Do not crush or kink or subject lines to tension.
This will result in damage to the lines which may impair their functional capability.

7

Unscrew nuts (1).

Screw/nut, control unit to vehicle floor

*BA91.60-P-1004-01Q

8

Release and disconnect electrical connectors (2).

9

Remove Supplemental Restraint System control unit (N2/10).

10

Install in the reverse order.

11

Commission Supplemental Restraint System control unit  (N2/10).

When replacing Supplemental Restraint System control unit  (N2/10).

AD00.00-P-2000-06MFA

Airbag

Number

Designation

Model 247

BA91.60-P-1004-01Q

Screw/nut, control unit to vehicle floor

Nm

10

Henviste dokumenter