P68.10-5792-08
1 | Footwell trim | 4 | Retaining clips | |
2 | Bolts | E43/82 | Right front footwell ambiance illumination | |
3 | Potential distributor |
Topical note | Information on preventing damage to electronic components due to electrostatic discharge | ||
| Remove/install | ||
1 | Move front passenger seat into the rearmost position. | ||
2 | Switch off ignition and store transmitter key outside of transmitter range (min. 2 m). | ||
3 | Remove screw/bolts (2) . | ||
4 | Unclip front right footwell ambient lighting (E43/82) and release and disconnect electrical connector. | ||
5 | Carefully pull footwell trim (1) toward the rear and lower as far as possible. | ||
6 | Remove potential distributors (3) in the direction of the arrow (arrows A) from the footwell trim (1). | ||
7 | Unclip retaining clips (4) from footwell trim (1) and remove footwell trim (1). | Dismantling tool | |
8 | Install in the reverse order. |
000 589 95 63 00
Dismantling tool
Henviste dokumenter
- ah5400p000101a Oplysninger med henblik på at undgå skader på elektroniske komponenter på grund af elektrostatisk afladning