ar9140p1515mce

Remove/install seat belt buckle (front seat)

Type ar · emne 91.40 · version 0200 · 2008-06-25

Gælder for: MODEL 451.3 /4 Driver seat

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 3 Karrosseri › 91 Sæder, køjer, selestrammere › 91.40 Sikkerhedsseler, selestrammere — Serie 451 (modeller 3**, 4**)

EinPAS 27 Passive sikkerhedssystemer › 27.17 Sikkerhedssystem › 27.17.20 sikkerhedssele/selelås/selestrammer — Serie 451 (modeller 3**, 4**)

AR91.40-P-1515MCE

Remove/install seat belt buckle (front seat)

16.6.08

MODEL 451.3 /4
Driver seat

Remove/install seat belt buckle (front seat)

P91.40-2786-07

1 Seatbelt buckle

2 Backrest frame side piece

4 Seat belt buckle wiring harness

3 Screw

Modification notes

2.4.08

Removal of backrest frame replaced by backrest frame side piece

Steps 4 to 7

Remove

Danger!

Risk of injury caused by backrest suddenly folding forward if release lever is accidentally operated during inspection and repair work

When working on the seat, be careful not to accidentally release the backrest mechanism allowing the seat to fold forward. Keep body parts clear of the backrest travel area.

AS91.00-Z-0005-01V

1

Remove seat

AR91.10-P-1000MCC

2

Check routing of wiring harness for seat belt buckle (4)

If the wiring harness for the seat belt buckle (4) has been routed as shown in picture A, then the seat belt buckle (1) and backrest frame side piece (2) have to be replaced. The wiring harness for the seat belt buckle (4) must be routed as shown in picture B.

3

Remove buckle (1)

Wiring harness for the seat belt buckle (4) routed as shown in picture A (old design of fastening for seat belt buckle (1)).

AR91.40-P-1515-01MCC

Wiring harness for the seat belt buckle (4) routed as shown in picture B (new design of fastening for seat belt buckle (1)).

AR91.40-P-1515-01MCE

4

Remove handle for seat backrest adjustment

When the wiring harness for the seat belt buckle (4) is routed as shown in picture A.

AR91.10-P-3470MCC

5

Remove seat backrest frame side piece (2)

When the wiring harness for the seat belt buckle (4) is routed as shown in picture A.

AR91.10-P-3331-02MCC

Install

6

Install seat backrest frame side piece (2)

When the wiring harness for the seat belt buckle (4) was routed as shown in picture A.

AR91.10-P-3331-02MCC

Screw in the bolts (3) of the backrest frame side piece (2) in the area of the seat belt buckle (1) up to the contact surface only.

*BA91.10-P-1002-01P

*BA91.10-P-1003-01P

7

Install handle for seat backrest adjustment

When the wiring harness for the seat belt buckle (4) was routed as shown in picture A.

AR91.10-P-3470MCC

8

Install belt buckle (1)

AR91.40-P-1515-02MCC

*BA91.10-P-1002-01P

*BA91.40-P-1003-01G

9

Install seat

AR91.10-P-1000MCC

Front seats

Number

Designation

Model 451.3/4

BA91.10-P-1002-01P

Bolt of backrest frame to seat frame

Nm

45

BA91.10-P-1003-01P

Nut, backrest frame side piece to backrest frame

Nm

20

Seat belts/emergency tensioning retractors

Number

Designation

Model 451.3/4

BA91.40-P-1003-01G

Screw on seat belt buckle

Nm

30

Henviste dokumenter