P91.10-3203-06
1 Handle
2 Seat frame
3 Mounting wedge
4 Spring clip
5 Catch hook
| Removing | ||
Danger! | Risk of injury caused by backrest suddenly folding forward if release lever is accidentally operated during inspection and repair work | When working on the seat, be careful not to accidentally release the backrest mechanism allowing the seat to fold forward. Keep body parts clear of the backrest travel area. | |
1 | Insert assembly wedge (3) between seat frame (2) and handle (1), pry off handle (1) from adjusting shaft of backrest adjustment and remove | The handle (1) is destroyed during removal. Pay attention to installation position of handle (1). | |
| |||
2 | Remove spring clip (4) from adjusting shaft of backrest adjustment using suitable pliers | Replace spring clip (4). Pay attention to installation position of spring clip (4). | |
| Install | ||
3 | Clip spring clip (4) into catch hooks (5) at handle (1) corresponding to its locking direction | ||
4 | Position new handle (1) on adjusting shaft of backrest adjustment and clip in | The handle (1) can only be installed when the spring clip (4) is inserted correctly. The lever of the handle (1) must run downwards (arrow) parallel to the seat frame (2). | |
5 | Perform function test of backrest adjustment |
Mounting wedge
110 589 03 59 00
Henviste dokumenter
- as9100z000501v Fare for personskade , hvis ryglænet pludseligt fældes fremad pga. ukontrolleretbetjening af frigørelsesarmen under kontrol- og reparationsarbejde