AR91.29-P-1550MA | Removing and installing front seat control module | 29.11.02 |
MODELS 220.0 /1 as of 1.7.01 with CODE (802) Model year 2002
P91.29-2259-09
1 Bolt
2 Bolt
3 Control module bracket
4 Flexible shaft
5 Transverse rod
6 Pneumatic line
M27m1 Forward and back motor
M27m2 Rear up/down motor
M28m1 Forward and back motor
M28m2 Rear up/down motor
N32/1 Left front seat adjustment control module with memory
N32/2 Right front seat adjustment control module with memory
| Remove/install | ||
1 | Remove front seat | up to 31.8.02. | |
as of 1.9.02. | |||
2 | Remove all connectors to front and rear side of left (N32/1) and right (N32/2) front seat adjustment control module with memory | ||
3 | Slacken tie straps (see arrow) at control module bracket lug (3) | Installation: Use new tie straps. | |
4 | Unscrew bolt (1, 2 pcs.) at front of left (N32/1) and right (N32/2) front seat adjustment control module with memory | ||
5 | Unscrew bolt (2, see magnification) from rear up/down motor (M27m2, M28m2) | ||
6 | Detach flexible shaft (4) from forward/back motor (M27m1, M28m1) | ||
7 | Carefully release front control module bracket (3) from transverse rod (5), (see arrow) until both plastic retaining clamps on underside of control module bracket (3) have been unclipped | Control module bracket (3) is fixed to the seat frame with a rivet (see magnification). | |
8 | Unclip pneumatic line (6) at front left (N32/1) and right (N32/2) side of left front seat adjustment control module with memory | ||
9 | Unclip left (N32/1) and right (N32/2) front seat adjustment control module with memory from control module bracket (3) latching lug (see arrow) at front right side | ||
10 | Push left (N32/1) and right (N32/2) front seat adjustment control module with memory from control module bracket (3) | ||
11 | Install in the reverse order | ||
12 | Perform front seat adjustment function test |