AR91.25-P-1750M | Remove/install front seat multicontour backrest control module | 1.10.02 |
MODELS 220.0 /1
with CODE (404b) Multicontour backrest driver seat
with CODE (405b) Multicontour backrest passenger seat
P91.25-2191-06
1 Pneumatic line connecting rail
2 Bolt
3 Frame
4 Overpressure reservoir
5 Catch
6 Control module connecting cable
7 Switch group connecting cable
N32/15 Left front multicontour backrest control module
N32/16 Right front multicontour backrest control module
sw Black pneumatic line with diam. of 4 mm
| Remove/install | ||
1 | Remove front seat | up to 31.8.02. | |
as of 1.9.02. | |||
2 | Unscrew screw (2) and remove frame (3) | ||
3 | Remove multicontour backrest, front left (N32/15) or right (N32/16) | ||
4 | Expose control module connecting cable (6) and disconnect from front seat adjustment control module (see arrow) | ||
5 | Expose switch group connecting cable (7) and disconnect from multicontour backrest switch group | ||
6 | Open catch (5) and remove pneumatic line connecting rail (1) | Open catch (5) using small screwdriver (see arrow). | |
7.1 | Unclip black pneumatic line with diam. of 4 mm (sw) to overpressure reservoir (4) | Only if seat cushion or backrest has to be removed. | |
8 | Install in the reverse order | ||
9 | Check multicontour seat backrest for proper function |